Safety Incidents OSHA Severe Injury Reports · 2015–2025
105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31

OSHA Accident Investigation · Summary #221566185

IL DEPT. OF CORRECTIONS - EAST MOLINE CORRECTIONAL CENTER

Event
Aerial Lift, Aerial Truck, Arm, Back, Blunt force, Blunt force trauma, Boom, Bucket, CPR, Chest, Correction officer, Cutting, Ejected, Fall, Fall From Elevation, Fall Protection, Falling Object, Fracture, Hoisting Mechanism, Inexperience, Laceration, Lack of Work Procedures, Rib, Roll-Over, Slope, Sloping, Torso, Training, Tree, Tree Limb, Unstable Surface
NAICS
922140
Inspection type
Federal Agency
Activity number
#346724321
Employer profile
IL DEPT. OF CORRECTIONS - EAST MOLINE CORRECTIONAL CENTER
Summary number
221566185
Report ID
0551701
Project type
C
Construction end-use
H

Event description

Employee dies from injuries after being ejected from lift

Investigation abstract

At 1:00 p.m. on May 23, 2023, an employee working as a corrections officer for a employee from the bucket and onto the ground. The employee may have also been struck in the chest and torso by the left basket railing as well. The employee was unconscious after the fall. Coworkers provided CPR until first responders arrived and transported the employee to the hospital. The employee died from fractured ribs and arms and blunt trauma to the chest. state correctional facility was cutting the branches and trunk of two trees. The employee was working from inside the basket of a 2007 Genie Model S-40 Self-Propelled Telescoping Aerial Lift. The lift was resting on a sloped and grassy area. The boom was extended approximately 40 feet into the air. The employee was working without fall protection. The employee adjusted the lift to continue cutting down the tree branches by adjusting the bucket's height and moving the lift side to side. While doing so, the lift's tires closest to trees began to lift off the ground. The lift tilted and rolled over ejecting the

Victim

  1. #1 Fatality Age 48 M

    Event type
    5
    Occupation code
    424
    Fall distance
    40

Codes shown verbatim from OSHA's accident-investigation database. A human-readable decoder is coming in a future release once the accident_lookup2 dictionary is loaded.