Safety Incidents OSHA Severe Injury Reports · 2015–2025
105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31

OSHA Accident Investigation · Summary #221601941

CLARK MACHINE CORPORATION

Event
Backing Up, Blocks, Chock, Crushed, Falling Object, Flatbed Truck, Load Shift, Overhead Crane, Parking Lot, Pinch Point, Steel, Storage Rack, Struck By, Unsecured, Wood
NAICS
332710
Inspection type
Federal Agency
Activity number
#346967714
Employer profile
CLARK MACHINE CORPORATION
Summary number
221601941
Report ID
0352470

Event description

Employee is crushed and killed by falling load from flatbed

Investigation abstract

At 12:42 p.m. on September 11, 2023, Employee #1 was part of a three-man group the rods. The rods were then transported from the automatic shop to the machine shop with Welder Mechanic #1 driving the truck. Video evidence shows that the steel rods shifted during the transport through the parking lot area, with no employees being aware of this occurring. Employee #1 signaled Welder Mechanic #1 with backing the flatbed trailer as it approached the machine shop. The flatbed was backed into the machine shop and parked so the front of the truck was still positioned outside of the bay door. At its final location, it was positioned in a manner that the flatbed was not level, contributing to the steel rods rolling when unstrapped. Welder Mechanic #1 exited the truck and started to unstrap the bundle on the passenger side, unaware that Employee #1 had started to walk that loaded three steel rods between 22-24 feet in length, 6-inch in diameter, towards him from the rear of the flatbed trailer into a pinch point area between the flatbed trailer and a storage rack. As soon as the strap was undone, all three steel rods started to roll towards the passenger side and off the flatbed trailer. Two of the three steel rods fell from the flatbed trailer, striking and crushing Employee #1. Employee #1 was killed. and weighing approximately 2,500 pounds each onto an 18-foot 4-inch flatbed trailer. The men loaded the three steel rods using an overhead crane and placing them on top of two wooden blocks measuring approximately 8-feet 4-inches long by 5 3/4-inches wide by 4 inches high on the back of the flatbed trailer. Once all three steel rods were loaded, they were strapped down with the middle strap of the flatbed trailer, one chock was placed at each end in between the pipes. The chocks were not secured and were allegedly placed on the passenger side of all

Victim

  1. #1 Fatality Age 67 M

    Event type
    1
    Occupation code
    7013

Codes shown verbatim from OSHA's accident-investigation database. A human-readable decoder is coming in a future release once the accident_lookup2 dictionary is loaded.