Struck against moving part of machinery or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at General Doors Corporation, 700 McColley Street, MILFORD, DELAWARE 19963
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
On 01/20/2015 at approximately 8:00 am, an accident occurred while the employee was operating a table saw ripping 1/8" hardboard. The employee was ripping 28" wide sheets of 1/8" hardboard 9' long by 23" wide using a table saw. His hand inadvertently slid under the front of the guard and caught the blade resulting in the loss of the right index finger between the first and second knuckle and broken bones and extensive lacerations on his middle finger, thumb and palm. He was taken to Milford Memorial Hospital then later transferred to Christiana Hospital for an overnight stay.
An employee was operating a strip saw. As the employee shut off the saw, their right index and middle fingertips were amputated by the blade before it came to a complete stop.
An employee was using a table saw to cut a piece of wood for wall framing. The wood jumped, causing the employee's hand to move toward the saw, amputating their left index finger and causing a laceration on their hand.
An employee was operating a trim saw. While trying to free a jammed board she had just cut, she came into contact with the running saw blade, which amputated her right thumb.
An employee had been unloading material from a drop table. When the employee reached to remove parts from a bin, the drop table came down on their right middle finger. The fingertip was amputated.
An employee was loading sliding doors and window panels onto a truck when the sliding doors fell on top of them. The employee sustained a pelvis fracture and internal injuries and was hospitalized.
The injured employee was working alongside a trainer. The trainer was adjusting the side fences that hold the wood in place as it passes through the molder. The injured employee was using compressed air to clean the area. They went to remove a sliver of wood to prevent a potential jam. The rollers activated, which processed material through the machine, caught the employee s glove, and pulled their hand toward the cutting head of the molder. The employee sustained lacerations to their right middle and ring fingers and an amputation to the distal phalanx of the middle finger.
On August 11, 2025, an employee was operating a clamping machine that used two pneumatic cylinders to clamp boards together for gluing. While he was positioning a board, the control was activated and the clamp on one side of the machine closed. A fingertip on his right hand was caught between the clamp and the board. He suffered an amputation to the fingertip (involving a torn fingernail and surrounding skin) as well as a fracture to the last joint of the finger.
On July 21, 2025, an employee was working from a 10-foot step ladder while installing a 3-by-5-foot glass window pane on the outside of a new home under construction. The window fell from the frame and the employee went to catch it when the ladder slipped. The employee fell 5 feet to the ground and landed on small pieces of concrete left over from the foundation pour. The employee was hospitalized with a dislocated elbow and fractured wrist that required surgery.
A flagger was directing traffic flow in a highway work zone. They were standing approximately 1.5 feet behind the shoulder's demarcating line, next to and slightly behind a traffic drum. As they were directing traffic into and out of the driveway of a parking lot, a car attempted to get around a truck and struck the traffic drum, which subsequently struck the employee, who was thrown 15 feet and landed on top of concrete aggregate. The employee suffered pelvic and rib fractures, T10 and L3 vertebra fractures, and internal bleeding.
An employee was troubleshooting a power washer in the field. Because there might have been water in its fuel, he brought it back to the shop and drained about a gallon of fuel from the tank into a plastic container. Some of the fuel spilled onto the floor and ignited. The employee was stomping out the fire when he lost his balance and tripped into a stool, which caused the plastic container to spill more fuel onto the fire. The employee's pants and shirt caught on fire, and he fell, abrading his knee while trying to get through the flames. As well as the knee abrasion, he suffered burns to the left leg and left lower quadrant of the torso. He was hospitalized.
An employee was backing up a tram (towing powered industrial equipment) to connect it to a trash bin. The employee's left forearm/wrist was caught and crushed between the tram and the bin. The employee was hospitalized.
An employee went to lift a carton and tripped on a different carton that was on the floor. She fell on the floor in the backroom and sustained a fractured right hip, and abrasions to her arm and knee. The employee was hospitalized and required surgery.