Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at TBP Converting, 400 Thomas Drive, PHOENIXVILLE, PENNSYLVANIA 19460
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was operating a rotary die press in the die cutting department on January 28, 2015. The employee sustained an amputation on the left hand below the first joint of the thumb while cleaning it.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 326150)
On July 22, 2025, an employee was cutting/torching a large piece of metal when a piece of the material broke loose, struck him mid-stomach, and knocked him to the ground. The employee was hospitalized with an umbilical hernia and fractures to his right femur and left fibula.
An employee was feeding material through a pinch roller. There was a line break and the employee was working to clear out the line. The closed roll grabbed his glove and pulled his entire arm through the machine. The employee sustained compartment syndrome and a broken fingertip requiring hospitalization.
An employee hooked up two bundles of steel tubing to be lifted with an overhead crane. He stumbled while walking and operating the crane and his right hand contacted the crane's pulley mechanism. The upward motion of the crane caused the cable to pull his finger into the pulley. The employee's fingertip was partially amputated.
The employee was operating a peeler machine when his left hand got caught against the log that was being peeled. The employee was hospitalized with lacerations to the fingers on his left hand that required stitches.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.