105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Olin Corporation

Compressed or pinched by shifting objects or equipment · Fractures and other injuries, n.e.c.

Federal OSHA recorded a severe workplace injury at Olin Corporation, 2400 Buffalo Ave, NIAGARA FALLS, NEW YORK 14302 on — Fractures and other injuries, n.e.c., affecting the multiple trunk locations.

An employee was using a rail mover to move three railcars. An employee on the ground was assisting him, and the two were communicating via radio. The employee on the ground became trapped between two of the railcars. He was taken to the hospital (Erie County Medical Center) with a non-displaced sacral fracture and torn cartilage in his pelvic area.

Hospitalized Multiple trunk locations Train, locomotive, rail car, unspecified

Olin Corporation

An employee was preparing to use a drill press on a 3-inch pipe. As they were adjusting the pipe, the machine actuated, amputating the employee's left index fingertip.

Olin Corporation

Employee was exposed to chlorine gas while performing a line break. He was hospitalized overnight.

Olin Corporation

Employee was hospitalized after falling from a 27-inch stepladder he was using to work on a piece of equipment. The employee fell and struck a piece of metal on another machine, causing him to break one rib and puncture his lung. The employee was admitted to Springhill Medical Center on Friday January 23, 2015.

View Olin Corporation's full OSHA safety record →

TForce Freight

An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.

Liveo Research, Inc.

An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.

Best Pump and Flow

An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.

FORD MOTOR COMPANY

During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.

Lasseter Tractor Company. Inc.

An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.

KUEHNE CHEMICAL COMPANY, INC.

An employee was standing on a ladder and pulling electrical wire into conduit when they fell to the ground. The employee was hospitalized with a fractured wrist and a lacerated liver.

Olin Corporation

An employee was preparing to use a drill press on a 3-inch pipe. As they were adjusting the pipe, the machine actuated, amputating the employee's left index fingertip.

Church & Dwight Co., Inc.

On June 10, 2022, an employee was loosening a bolt to change out a polish filter. Hot water with dissolved sodium carbonate sprayed out of the filter and splashed the employee resulting in second degree burns on the right side of their torso and upper right leg.

Church & Dwight Co., Inc.

On December 26, 2020, an employee reached under a chain conveyor to get a piece of wood that had splintered from a pallet. The conveyor had been stopped, but it advanced and the employee's left hand was pulled between it and a tension roller. The employee suffered crushing injuries to the hand and amputations to the left middle finger and thumb.

Dhaliwal Labs North, LLC

An employee was using a pallet wrapping machine to wrap product on a pallet. He had turned the machine off and was at the bottom with the wrap when the pallet shifted and knocked him off balance. His thumb was pinched between the pallet and the machine; the tip was amputated to the first knuckle.

Garden Angels New York LLC

An employee was cleaning leaves with a backpack blower when he fell from a ladder, resulting in injuries to his head, neck, and back.

Cashless Tolling Constructors

An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.

NYU Langone Hospital-Brooklyn

An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.

VILLAGER CONSTRUCTION, INC.

An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.