Penda Corporation

An employee was on a ladder turning a hot water valve when the valve threads stripped and caused hot water to spray the employee. He fell about 5 feet to the concrete floor below, breaking two ribs.

On January 27, 2015, an employee's hand was injured when he reached into a piece of equipment to remove a jam, resulting in hospitalization.

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

An employee was descending a ladder when their foot caught on the edge of the bottom step. The employee fell and struck the floor, landing on their left hip and suffering a hip fracture that required hospitalization and surgery.

An employee had loaded parts into his van and was pulling an empty utility cart back into the store. The wheels of the cart got caught in the doorway. When the employee pulled it through, the cart fell over onto him and he fell to the floor, landing on his right hip. The employee's hip was fractured.

An employee was found on the floor within the enclosure of a laser machine. The employee was adjusting a sheet of metal on the machine while carrying a remote control, which actuated the machine, moving the carriage and causing the employee to be caught between the carriage and the machine table. The employee was hospitalized with a broken right shoulder and left ankle, and lacerations on their legs and ankles.

An employee was wrapping pallets using a plastic wrap dispenser when he felt a pop in his back along with a burning and stabbing sensation. The employee sustained the herniation of discs L4 and L5.

An employee was working at the end of a ramp when a powered industrial truck rolled down the ramp and broke the employee's foot.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.