Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Maugus Manufacturing Incorporated, 239 North Ann Street, LANCASTER, PENNSYLVANIA 17602
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An Aerotek temporary employee was attempting to clear a jam on compression molding machine number 4 when the machine cycled and amputated a portion of his right pointer finger.
An employee was setting up a liner press. His right index finger was caught by a belt and pulley near the adjustment wheel, and the fingertip was amputated.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 339994)
An employee was cutting hanks of material on an abrasive cutter. A hank end opened up. As the employee was working to clear loose material, the machine was triggered and amputated 1/4 inch of his right middle fingertip.
An employee was operating a feathertipping machine, using it to feathertip the bristles of a handled brush. The employee's fingers became stuck in the machine, and the employee's little finger and ring fingertip were amputated. The machine was guarded at the time.
An employee was operating a re-winder machine, re-winding fabric rolls for use in production. The employee's fingers became caught in a nip point and were pulled into the spinning fabric. The employee suffered a crush injury to their right middle finger, resulting in hospitalization and medical amputation of the fingertip.
On December 10, 2024, an employee was driving a stand-up forklift, moving pallets off racks in a building. The employee's hand was caught between the forklift and the bar that prevented ride-under, resulting in a crush injury to the left hand. The employee was hospitalized.
An employee was inserting fabric into a winder machine when her hand was pulled into the machine. Her right little finger was amputated, and she sustained an injury to her right ring finger.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.