FMC Technologies

Employees were servicing a tool and attempting to remove the pivot pins while the tool was in the horizontal position. The first employee was kneeling and facing the tool, while a second employee was operating the grab handle to remove the pivot pins. The first pivot pin was successfully removed. While attempting to remove the second pivot pin, the second employee rotated the handle from the unlock position to the lock position. He then rotated the grab handle downward. During this operation, the pivot pin came out and allowed the grab handle to rotate past its normal stop (lock position). The second employee's right middle finger was then caught between the grab handle and a weldment, resulting in a fingertip amputation.

An employee was being lifted by an aerial lift to repair a wellhead. The employee's left thumb got crushed and fractured between the aerial lift and the wellhead.

An employee was repairing a seal on a valve operator. He placed the drum cover over the actuator piston using an overhead crane and was manipulating the drum while operating the crane controls. While attempting to lower the drum the final 2 inches, he inadvertently pushed the wrong button on the hoist control, causing the drum to move upward. As a result, his left thumb was pinched between the base plate and drum cover. There was no amputation.

An employee was operating a machine when a wire pulled his right glove resulting in amputation of the index and middle fingertips.

An employee was grinding chicken when their right index fingertip was caught in the grinder and amputated.

An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.

An employee was passing through a large metal door when the door closed on the employee, resulting in a cracked rib.

An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.

Employees were replacing a 24" pig trap door. A strap was shackled on the pig trap door and connected to a forklift. Welders began to cut the door off. An employee was holding onto the door when the cut was finished. The door shifted and caught his fingers, resulting in a hand injury and amputation.

An employee was fitting an arbor fixture into a rotor housing to be reworked. The rotor is moved by a hoist. The arbor was being lowered into the rotor housing when the arbor slipped down onto his hand and amputated a portion of his left thumb.

An employee was operating a brake press when his left hand was caught in a pivot point and fractured.

A crew was tripping out of the hole with an electrical submersible pump (ESP) in the process of swapping tubing tong heads to break down the ESP. An employee's left arm was caught and pinched by the tubing tongs. The employee sustained three lacerations and a fracture to the arm.

On May 21, 2025, at approximately 3:40 PM, a machinist was preparing a CNC lathe machine for it's next run. He was closing the machine door to complete the tooling setup when the door crushed his right middle finger. The employee required a surgical amputation to his fingertip.

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.