Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Glanbia Foods, Inc., 1734 S. 2300 E., GOODING, IDAHO 83330
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An maintenance employee opened a closed panel of an energized motor which activated unexpectedly catching the employee's index, ring and middle fingers in the pulley system and causing an amputation injury.
HospitalizedAmputationFinger(s), fingernail(s), unspecifiedFood and beverage processing machinery-specialized, unspecified
An employee was working at the calcium flow board when the gasket from the outflowing hydrogen sulfide tank failed. The resultant pressure pushed the sodium hydroxide solution 15 feet to where the employee was working. The chemical caused burns to 12% of the backside of the employee's lower legs.
While troubleshooting a conveyor system, an employee's right hand became caught in the machinery. The employee sustained some degloving and two fingertips were amputated.
Two maintenance workers were servicing an electronic fill button on a nearby 12 to 17 percent sodium hypochlorite chemical day tank. A 1-inch chemical line became dislodged and sprayed both employees, causing chemical burns on their chests, torsos, and arms. Both employees were hospitalized.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 311513)
An employee was diagnosing the lack of flow of product to a powder bin. The employee removed the rotary star valve below the bin. While he was reinstalling the valve, his right middle finger was crushed between its shaft and its housing. The finger was partially amputated.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
An employee was changing an O-ring on a pneumatic valve. The employee had placed the valve on his work cart and was applying air to open the valve and access the O-ring. After changing the O-ring, the valve closed on his fingertip, crushing it. He was taken to the hospital, where he received an amputation.
An employee was using a pike to move a pallet of sugar that was stuck in the powder racking. The employee fell backward, landing on his right leg. The employee's leg was fractured and he was hospitalized.
The injured employee was carrying totes of cheese when they tripped over another employee's foot/ankle and fell to the cement floor. The injured employee sustained six fractured ribs on the left side and was hospitalized.
An employee was diagnosing the lack of flow of product to a powder bin. The employee removed the rotary star valve below the bin. While he was reinstalling the valve, his right middle finger was crushed between its shaft and its housing. The finger was partially amputated.
An employee was standing on a multi-purpose ladder installing head flashing over a window. Their feet were approximately 6 feet off the ground and three rungs from the top. The employee lost their grip on the drill they were using and the ladder tipped over. The employee fell from the ladder to the ground, resulting in a fractured left wrist, bruised chest, and lacerations to their face and lip.
An employee was inspecting the overhead area of a single-person lift and repositioning the lift through a double doorway. As they were transitioning through the doorway, they were caught between the doorframe and the vertical mast of the lift. The employee was hospitalized with injuries to the nose, left maxillary sinus, left orbital bone, and left jaw, with fractures at the maxillary sinus area.
An employee was loading a 4-inch wooden door into a pickup truck when he felt a pop in his right side behind his shoulder blade. He was hospitalized later that day and underwent surgery, having suffered a collapsed right lung.