Contact with hot objects or substances · Second degree heat (thermal) burns
At a glance
Federal OSHA recorded a severe workplace injury
at Oxbow Calcining, LLC, 2200 Brooklawn Dr., BATON ROUGE, LOUISIANA 70807
on — Second degree heat (thermal) burns, affecting the nonclassifiable.
Final narrative
While an employee was moving a small pile of hot material with a bobcat, a flash of steam entered the cab of the bobcat. The employee exited the cab and tripped into a pool of hot water, receiving first and second degree burns and requiring hospitalization.
An employee was uncoupling a hose from an air compressor. The pressurized hose struck the employee's left side, fracturing a rib and lacerating their kidney and spleen.
Three employees were in a large interior area underneath a concrete silo. They were moving a screw conveyor housing out of the way in an area where they were planning to install a new screw conveyor flight. As they pushed the screw conveyor housing across the concrete floor, the front vertical angle iron support broke at the welded connection to the housing. As the housing fell approximately 21 inches to the ground, the injured employee's right foot was caught underneath and fractured. The injury required surgery and hospitalization.
An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.
An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.
An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.
An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.
More severe injuries in this industry (NAICS 324191)
An employee was putting together cardboard boxes in order to ship a product while a nearby forklift was grabbing a quarter-full tote from a rack that was 12 feet high. The forklift pushed the tote off the pallet rack and it struck the employee, resulting in broken ribs.
An employee was operating a spout machine when a spout became jammed on the spout piston. The employee opened the enclosed plexiglass protective enclosure around the machine to gain access to the jammed spout located on the crimping piston. The employee was unjamming the spout under the transfer table when her right index finger was crushed. The employee suffered an amputation to her fingertip.
An employee was moving 55-gallon oil drums from a pallet on a forklift to a pallet on the floor. One of the oil drums collided with another oil drum, contacting the employee's left middle finger and causing a fingertip amputation.
An employee was removing a cap from a pressurized line. The end cap came off the line and struck the employee's jaw, causing a laceration and fracture on the left side.
A driver was exiting his vehicle outside the plant gate when his foot slipped on the top step of the truck. He fell to the ground, landed on his left hip and elbow. The employee was hospitalized with a fractured hip/femur.
A security employee was responding to an urgent call from staff regarding a violent patient. The employee tripped and fell on the floor outside of the stairwell. The employee sustained a closed head injury, contusion of the cerebrum without loss of consciousness, and a closed fracture of the distal end of the right radius.
A temporary employee was testing an electrical starter motor. He was placing tape on the starter while the breaker was not engaged, but the starter sent an arc flash that burned his hands and stomach.
An employee was walking on a sidewalk and stubbed his toe on an elevated portion of concrete, causing him to trip and fall. The employee's right knee was dislocated.