Irrigation Aid, Inc

An employee was tossing a damaged toilet into a compactor. The toilet bounced off the compactor and lacerated the employee's right wrist, cutting an artery and tendon.

An employee was operating a hydraulic jack to bend a frame when the jack came loose and struck the employee. They were hospitalized for a spleen injury.

A truck had been towed into the shop with a flat tire and a blown airbag. An employee checked the tire for damage and was airing the tire. The employee was installing the valve core when the bead slipped off the rim. Air escaped, and the aluminum wheel struck the employee's head and face. The employee became unresponsive and was bleeding.

On December 14, 2023, at 8:40 p.m., three employees were inspecting milling machines for startup. A few of the sleeves on the mill drum needed to be changed out. The injured employee was trying to input a sleeve on the mill drum using a hammer. The hammer hit the edge of the drum, which caused a metal piece to splinter off and strike the employee's cheek just below the left eye. The metal splinter embedded in the back of their eye socket, resulting in pain, swelling, and bleeding that required hospitalization.

An employee was pushing a line of carts into a vestibule when the door cable snapped and struck his right ankle. The employee suffered a fracture that required surgery and hospitalization.

An employee was replacing a water check valve at a water plant. He was lifting the valve with two hands when it slipped and contacted his right ring finger, resulting in a partial amputation without bone loss.

The injured employee was assisting with hitching a trailer to a truck. The employee was working to engage the lunette ring on the trailer with the pintle hook on the truck. A mini-excavator began driving onto the rear of the trailer. The added weight caused the rear of the trailer to lower and the front to rise, creating a pinch point between the trailer and the truck. The employee s left thumb was caught in the latch mechanism of the pintle hook. The thumb tip was partially amputated and required surgery.

An employee was spraying down an area by a conveyor he had been using. Moving parts (such as rollers and chains) inside a gear box amputated his right arm at the elbow. The employee was hospitalized.

An employee was adjusting a machine attached to a tractor that rolls out hose into a trench. The machine lowered to the ground and part of it landed on his big toe, amputating it.

An employee was stung by a bee while working in the field. The employee suffered an allergic reaction and was hospitalized.

An employee tripped over a bin and fell to the floor. She landed on her hip and braced herself with her arm, resulting in a fractured hip and wrist.

An employee was diagnosing the lack of flow of product to a powder bin. The employee removed the rotary star valve below the bin. While he was reinstalling the valve, his right middle finger was crushed between its shaft and its housing. The finger was partially amputated.

An employee was standing on a multi-purpose ladder installing head flashing over a window. Their feet were approximately 6 feet off the ground and three rungs from the top. The employee lost their grip on the drill they were using and the ladder tipped over. The employee fell from the ladder to the ground, resulting in a fractured left wrist, bruised chest, and lacerations to their face and lip.

An employee was inspecting the overhead area of a single-person lift and repositioning the lift through a double doorway. As they were transitioning through the doorway, they were caught between the doorframe and the vertical mast of the lift. The employee was hospitalized with injuries to the nose, left maxillary sinus, left orbital bone, and left jaw, with fractures at the maxillary sinus area.

An employee was loading a 4-inch wooden door into a pickup truck when he felt a pop in his right side behind his shoulder blade. He was hospitalized later that day and underwent surgery, having suffered a collapsed right lung.