Chip Haulers, LLC

Two employees were walking through the warehouse behind a forklift that was moving pallets of 30-foot metal bottom bars. When the forklift reversed, the top of the forklift struck a box of metal bottom bars on top of racking, causing the box to fall and strike the two employees. They were both taken to the hospital; one employee was treated and released without being admitted. The other employee was hospitalized with a fractured left orbital bone and an injured right knee.

The injured employee was spray painting lay flat shipping reels while another employee was picking up the reels with a telehandler after they were painted. The telehandler bumped a reel, causing other reels to fall. The injured employee was caught between the reels, resulting in broken left femur.

An employee was installing an aerial drop cable across a roadway. The employee was on a ladder positioned against a telephone pole. Cable had been installed on one side of the roadway. The employee was making the connection to the pole on the opposite side of the roadway when a box truck contacted the cable, causing the employee to fall onto the grass of the customer's yard. The employee sustained broken ribs and was hospitalized.

An employee was performing routine housekeeping duties when a bale of plastic bottles slid off the forks of a forklift that was backing out of a trailer. The bale struck the employee, pushing her into another machine. The employee suffered a fractured rib and punctured lung.

An employee was using a 4-by-4 to straighten a pack of wood. A forklift nudged the 4-by-4, which caused the employee's right hand to be caught between it and the pack of wood. The employee suffered a partial amputation to the right ring finger.

An employee was installing fence posts when they stepped into a recently dug hole that was not visible due to rainfall. The employee's leg was fractured.

A driver was exiting his vehicle outside the plant gate when his foot slipped on the top step of the truck. He fell to the ground, landed on his left hip and elbow. The employee was hospitalized with a fractured hip/femur.

An employee was on the ground working to close a trailer door. The door was caught by the wind and blew the employee backward. He landed on his back and sustained four fractured ribs, requiring hospitalization.

An employee had been loading packages into a vehicle. While exiting the vehicle, he tripped and fell, fracturing both ankles.

An employee was working from the elevated bucket of an excavator when they fell between two tanks and landed on the ground. The employee sustained a fractured leg.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.