105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

JR Vinagro Corp.

Struck by dislodged flying object, particle · Cuts, lacerations

Federal OSHA recorded a severe workplace injury at JR Vinagro Corp., Route 18 & Route 195, Exit 15, NEW BEDFORD, MASSACHUSETTS 02740 on — Cuts, lacerations, affecting the nonclassifiable.

Watch JR Vinagro Corp. — free Get an email when a new federal OSHA severe-injury report for JR Vinagro Corp. is published. One employer, no account, unsubscribe in one click.

An employee was performing prep work on metal for a highway construction project. An equipment operator was extracting a metal sheet from the ground nearby when the shackle for the sling broke and sent metal shards flying. The shards struck and lacerated the employee, requiring stitches.

Hospitalized Nonclassifiable Metal chips, particles

Jr Vinagro Corp.

A machine operator was using a grease gun to apply lubricant to the shovel area of the excavator. The Shovel was situated on the ground, and very close to the edge of an 8 foot drop on a pile of material. The employee lost his footing, fell down the 8 foot drop, and struck his head on a concrete object resulting in multiple broken ribs and a head injury.

View JR Vinagro Corp.'s full OSHA safety record →

Lowe's Home Improvement

An employee was tossing a damaged toilet into a compactor. The toilet bounced off the compactor and lacerated the employee's right wrist, cutting an artery and tendon.

S & J Construction, LLC

An employee was operating a hydraulic jack to bend a frame when the jack came loose and struck the employee. They were hospitalized for a spleen injury.

RMVK Enterprise, INC.

A truck had been towed into the shop with a flat tire and a blown airbag. An employee checked the tire for damage and was airing the tire. The employee was installing the valve core when the bead slipped off the rim. Air escaped, and the aluminum wheel struck the employee's head and face. The employee became unresponsive and was bleeding.

Dustrol Inc.

On December 14, 2023, at 8:40 p.m., three employees were inspecting milling machines for startup. A few of the sleeves on the mill drum needed to be changed out. The injured employee was trying to input a sleeve on the mill drum using a hammer. The hammer hit the edge of the drum, which caused a metal piece to splinter off and strike the employee's cheek just below the left eye. The metal splinter embedded in the back of their eye socket, resulting in pain, swelling, and bleeding that required hospitalization.

WalMart #436

An employee was pushing a line of carts into a vestibule when the door cable snapped and struck his right ankle. The employee suffered a fracture that required surgery and hospitalization.

Owl's Head Alloys West Point

An employee was going into a trailer to mark product for shipment and the trailer pulled away from the dock. The employee fell out of the trailer, contacted the dock plate, and then fell to the ground. The employee was hospitalized with a punctured lung, fractured ribs, and contusions.

Heavy Weight Inc

An employee was checking on a machine outside of the building and removed a cover to clean out a blocked area. His hand was caught by a rotary valve in a dust collection machine. The employee's fingertip was amputated.

Techemet, LP

A shear operator's hand and fingers were caught in a machine's point of operation. The operator's right index finger was crushed and was partially medically amputated.

ELG Metals, Inc - Chicago

An employee was operating a forklift. He parked on a ramp and got off the forklift to retrieve material, at which point the forklift rolled backward and ran over his leg. The leg was broken and he was hospitalized, requiring surgery.

Florida Parishes Industries, Inc.

An employee was using a shear to cut metal when the blade cut his left ring finger and amputated his left little finger.

A&S Services Group

An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.

American Flowform and Machining, LLC

Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.

Acushnet Rubber Company, Inc

An employee had been loading a double deck press. The employee saw a mold had been sent in with the C-hook still attached on the belly bar. As he went to remove the hook from the mold, his right thumb got caught on the C-hook. The employee's thumb was partially amputated.

Warner Brothers, LLC

An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.

Roby's Propane Gas

An employee was delivering home heating fuel when bees came from the ground and stung the employee's face, neck, torso, and hands. The employee proceeded to shut off the oil flow before losing consciousness. They were hospitalized due to an anaphylactic reaction.