Struck against moving part of machinery or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Bennett Lumber Products, Inc., 3759 HWY 6, PRINCETON, IDAHO 83857
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee locked out the rip saw to remove a jam when his glove got caught on the blade. The blade, which was still moving under its own momentum, pulled the employee's right hand into a pinch point and crushed three fingers, which were then amputated.
An employee was welding and grinding the motor mounts under the tail sawyer. The equipment was repressurized, causing the hydraulic unit to actuate and pin the employee. They sustained a right femur fracture that required hospitalization.
An employee and co-worker were taking out the outfeed roll from a non-energized planer used for spare parts. When lifting the pivot housing, the outfeed roll became bound up, so the co-worker pushed while the employee was trying guide the roll. The roll sprung out and rolled forward, smashing the employee's hand between the roll housing and the planer housing. The employee suffered a crushed index finger down to the third phalange.
An employee was reaching down to pull a stuck board from an unscrambler machine. The machine gate came down and smashed the employee's upper body. He suffered a cut above the eye, as well as cuts and scrapes to the head that required stitches.
An employee activated a gate with his left hand while his right hand was still on product. His right thumb then became caught between the gate and the product. When he pulled his hand back, his right thumb tip was amputated.
An employee was operating a strip saw. As the employee shut off the saw, their right index and middle fingertips were amputated by the blade before it came to a complete stop.
An employee was using a table saw to cut a piece of wood for wall framing. The wood jumped, causing the employee's hand to move toward the saw, amputating their left index finger and causing a laceration on their hand.
An employee was operating a trim saw. While trying to free a jammed board she had just cut, she came into contact with the running saw blade, which amputated her right thumb.
An employee was repairing a photo eye on the infeed roll case when they dropped a tool. The employee went to grab the tool and his fingers contacted the chain and sprocket of the infeed roll case. His fingers were pulled into the pinch point and the fingertips were crushed, resulting in amputation of one fingertip.
An employee was troubleshooting dispersing equipment. A belt and pulley system was energized, and the moving belt caught the employee's right ring finger. He suffered a partial amputation at the first knuckle, below the nail.
An employee was cleaning the photo eye sensors of a piece of equipment between the saw that cuts lumber into lengths and boards. The employee stepped on a metal grate that gave way and fell 8-10 feet. The employee was able to remove himself from the conveyor. His tibia was fractured just below the knee.
While refilling a lubricant tank, an employee observed that a pump was not operating correctly. While troubleshooting the issue, the employee reached toward the back of the pump to check for proper airflow. Their left index finger contacted moving components in the pump's piston mechanism, resulting in partial amputation of the fingertip.
An employee was diagnosing the lack of flow of product to a powder bin. The employee removed the rotary star valve below the bin. While he was reinstalling the valve, his right middle finger was crushed between its shaft and its housing. The finger was partially amputated.
An employee was standing on a multi-purpose ladder installing head flashing over a window. Their feet were approximately 6 feet off the ground and three rungs from the top. The employee lost their grip on the drill they were using and the ladder tipped over. The employee fell from the ladder to the ground, resulting in a fractured left wrist, bruised chest, and lacerations to their face and lip.
An employee was inspecting the overhead area of a single-person lift and repositioning the lift through a double doorway. As they were transitioning through the doorway, they were caught between the doorframe and the vertical mast of the lift. The employee was hospitalized with injuries to the nose, left maxillary sinus, left orbital bone, and left jaw, with fractures at the maxillary sinus area.
An employee was loading a 4-inch wooden door into a pickup truck when he felt a pop in his right side behind his shoulder blade. He was hospitalized later that day and underwent surgery, having suffered a collapsed right lung.