Struck against moving part of machinery or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Fadco Inc, 5531 E. Admiral Place, TULSA, OKLAHOMA 74115
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was operating an unguarded table saw and amputated three fingertips on the left hand.
An employee was operating a strip saw. As the employee shut off the saw, their right index and middle fingertips were amputated by the blade before it came to a complete stop.
An employee was using a table saw to cut a piece of wood for wall framing. The wood jumped, causing the employee's hand to move toward the saw, amputating their left index finger and causing a laceration on their hand.
An employee was operating a trim saw. While trying to free a jammed board she had just cut, she came into contact with the running saw blade, which amputated her right thumb.
An employee was ripping a 1/2-inch board on a table saw. As the drop piece fell, so did the push stick, and it was pulled into the blade along with the employee's right index finger. The employee's finger was partially amputated. The machine was not guarded at the time of the incident.
An employee was running a piece of wood through a jointer machine. The wood caught and stopped moving, but the employee's left hand kept moving and contacted the blade. The employee suffered a partial amputation to the little finger, below the first knuckle.
An employee was operating a chop saw to cut weather stripping material and suffered amputations to their left thumb and index finger. The employee's middle finger was also lacerated.
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
An employee was working in the food service warehouse when he experienced chest pain, difficulty breathing, and lost consciousness. The employee sustained carbon monoxide poisoning.
An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.
An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.
An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.