Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Guy Metals Inc, 1890 Guy Metals Drive, HAMMOND, WISCONSIN 54015
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Watch Guy Metals Inc — freeGet an email when a new federal OSHA severe-injury report for Guy Metals Inc is published. One employer, no account, unsubscribe in one click.
Final narrative
At approximately 2:30 p.m., on 1/25/16, an employee operating a metal polishing machine lifted a curtain to wipe down the feed rollers on the machine. The employee's left-hand little finger was caught between the feed roller and the metal plate and had to be surgically amputated at the second knuckle.
An employee was loading a metal pipe on a flatbed semi-trailer when the employee fell off the side of the flatbed semi-trailer. After the employee fell off the trailer, the pipe shifted position, rolled off the trailer, and landed on the employee's left leg. The employee was hospitalized with a fractured lower left leg.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 332813)
An employee placed an aluminum step ladder beside a tractor trailer and was removing a piece of scrap aluminum from the trailer that resulted from a motor vehicle accident. While coming down the ladder, the employee fell approximately 6 feet to the concrete. The employee was hospitalized with a fractured T4 vertebra.
On August 26, 2025, an employee was repairing a pipe at a tank. The employee fell and slid down the tank, suffering severe lacerations to the lower arms. The employee was hospitalized.
On August 26, 2025, a temporary employee was assisting a mechanic. The employee was on an overhead crane, removing a chain hoist attachment over a large plating tank. When the platform of the crane was moved, the employee became caught between the platform's railing and a support beam. The employee sustained a punctured lung and fractures to their clavicles, humerus, and ribs.
An employee was adding an all purpose soak and electro cleaner chemical to a water tank to make a cleaner bath. An exothermic reaction caused the 200 F water to splash on him, and he suffered hot water and steam burns to the right side of his face, his upper right arm, the right side of his torso, and his right leg.
At 3:00 AM, on 2/18/2025, an employee was mixing chemicals. The employee had difficulty breathing due to inhalation of unknown chemicals. The employee was hospitalized.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.