Contact with hot objects or substances · Second degree heat (thermal) burns
At a glance
Federal OSHA recorded a severe workplace injury
at Cochran Motors, Inc., 318 Old Haymaker Road, MONROEVILLE, PENNSYLVANIA 15146
on — Second degree heat (thermal) burns, affecting the head and trunk.
Final narrative
An employee was adjusting the lacquer recycling machine. When the employee opened the machine to fix the bag, hot liquid sprayed out, causing second degree burns to the right side of the employee's trunk and head.
HospitalizedHead and trunkLacquer, shellac, varnish
An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.
An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.
An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.
An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.
More severe injuries in this industry (NAICS 441110)
An employee was working underneath a vehicle when the vehicle began to roll and a tire caught the employee's left ear. The employee sustained a laceration and partial amputation of their ear, requiring hospitalization and surgery to reattach the ear.
A car was being backed out of a bay so that another car could pull into it. The car's brakes did not respond, and the car reversed quickly. The injured employee approached the car to stop it, and it pinned his right leg against a lift. The employee was hospitalized.
An employee was exiting the company shuttle van when his shoe became caught on the door of the vehicle, causing him to fall out of the van to the ground. The employee was hospitalized with a fractured hip that required surgery.
An employee was working to change the tires and brakes on a vehicle. He pulled the vehicle out of the bay. The brakes failed, and the car drifted backward into another bay where it pinned the injured employee against the arm of a vehicle lift. The injured employee sustained seven fractured ribs on his left side.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.