Caught in or compressed by equipment or objects, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Leader Gasket, 905 W. 13th Street, DEER PARK, TEXAS 77536
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was changing the air line on a three-station pneumatic press. Her finger was in a porthole on the equipment when she connected the air line to the machine. The air caused a piston in the machine to be actuated while her finger was in the hole, amputating her right pinky finger between the first and second knuckle.
An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.
An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.
An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.
An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.
An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.
More severe injuries in this industry (NAICS 339991)
An employee had been loading a double deck press. The employee saw a mold had been sent in with the C-hook still attached on the belly bar. As he went to remove the hook from the mold, his right thumb got caught on the C-hook. The employee's thumb was partially amputated.
An employee was performing stamping operations using a 160-ton press machine. They began to clean the machine when the press came down on their hand, resulting in multiple finger amputations.
An employee was feeding a ring into a horizontal winder when the ring got caught. As the employee was getting it to continue feeding into the machine, her right middle finger was caught in a pinch point on the machine's wheel. The fingertip was partially amputated.
An employee was operating a tape cutting machine, which automatically cuts 2-inch cloth material into predetermined lengths. The material became jammed in the blade, which froze in the partway down position. The employee began working to unjam the material. The machine activated, causing the blade to become free. The blade came down and amputated the employee's left index fingertip above the first knuckle and the tip of their left thumb.
An employee was adjusting a ring on a bar bending machine when their glove became caught in a pinch point on the machine. The machine was activated and the employee sustained fractures to the four fingers on their right hand and amputations to the index and little fingers.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.