Kimberly-Clark Corporation

An employee was clearing a jam on a bagger machine. He was severely shocked by static electricity.

An employee was inspecting the inside of a dryer. An object moved inside the dryer, crushing the employee's skull against the side of the dryer. The employee suffered multiple skull fractures.

An employee was attempting to place a core plug into a core at the hard roll towel area and pinched his left middle finger between the core and the core plug resulting in amputation of the fingertip.

An employee was installing a fan belt on an exhaust fan when his glove was caught and his right thumb tip was partially amputated by the belt.

An employee was walking in the basement where hot stock had overflowed and floated a grate up off the drain. The employee stepped into the uncovered drain hole and suffered second degree burns to the left leg and foot.

An employee was climbing a step ladder while carrying a 3-foot piece of conduit. As he went to reposition his feet on the ladder by pivoting, he slipped and fell from the third rung of a 6-foot ladder. The employee sustained fractures to the left femur, right elbow, and right ring finger.

An employee was descending a 4-step maintenance stand when she missed the bottom step and fell to the hangar floor. The employee suffered a left hip fracture.

An employee stopped a belt and was going to check it for missing packages. She fell backward 3-4 feet from an elevated platform and sustained a broken right arm.

An employee had just finished a routine concrete pour and was ascending the ladder to clean the concrete mixer truck. The employee lost their grip and fell approximately 2-3 feet, contacting the truck's bumper. The employee suffered rib fractures and a punctured lung.

An employee was performing duties as an expeditor. After opening the dock door, the employee scanned the barcode on the door of the truck and placed one foot on the truck and one foot on the dock. The truck drove out of the stall, causing the employee to fall 4 feet off the dock onto the concrete. The employee sustained fractures to the right side of the pelvis, elbow, and a left ring fingertip as well as injuries to the right wrist and bruising to the back and stomach.

An employee was clearing a material jam on a line, at a point where it formed the cores of diapers. When he removed the material, his left little finger was caught between the belts of a forming drum. His hand was lacerated and the finger was broken. He was hospitalized, requiring surgery. The machine was guarded at the time of the incident.

An employee slipped on a recently mopped concrete floor and fell. The employee sustained a hip fracture.

On April 9, 2025, an employee was cleaning anilox rollers in a machine with a rag. The machine caught the rag and then the employee's left hand, resulting in amputation of the middle finger.

An employee was jogging two rollers to clear a paper jam when his left hand was pulled into the rollers, resulting in amputations of the index, middle, and ring fingers down to the knuckle.

On July 27, 2024, at 2:45 AM, an employee was walking down an aisle in the converting department when he tripped and fell on the ground. The employee was hospitalized with a fractured left hip.

An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.

An employee was working in the food service warehouse when he experienced chest pain, difficulty breathing, and lost consciousness. The employee sustained carbon monoxide poisoning.

An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.

An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.

An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.