Baxter Healthcare Corporation

A forklift operator was making a right turn and struck a corner wall. The employee sustained a heel fracture and a laceration that required stitches.

An employee was clearing a jammed machine. The machine activated and the employee's left index fingertip was caught in its cutting knives compartment. The fingertip was amputated.

An employee tripped and fell while walking through a lobby. The employee suffered a left wrist contusion, a laceration at the upper left lip, and a possible concussion.

An employee was on a forklift's riding platform when it struck a guard rail. The employee suffered a broken tibia and a muscle injury to the leg.

An employee was working on a plastic film extrusion line when her clothing became caught in the machinery. Her left arm was then pulled in between two rollers in the extrusion line, causing skin and tissue trauma. She was hospitalized overnight.

An employee was walking back to her workstation. A forklift reversed a short distance, then completed a U-turn and struck her, running over her lower extremities. She was hospitalized with a broken ankle.

An employee was training on a jockey truck. Upon stepping out of the truck, the employee was struck by a rubber tire gantry crane, resulting in amputations of the right leg above the knee and left leg below the knee.

An employee was standing at the rear of a double pallet jack. Another double jack approached, and the employee's lower leg was caught between the two pieces of equipment. He suffered a broken tibia and fibula.

An employee was unloading large material bags on a loading dock. A forklift tine pinned the employee's foot against a pallet, causing the employee to fall and suffer a broken ankle.

An employee was pushing a container when they were struck by a forklift. The employee sustained a left leg fracture.

On August 15, 2025, an employee was in a small room right before the exit. The door in the little room was locked. The employee climbed over a wall and hopped down to the other side, falling and resulting in a twisted right ankle. The employee was hospitalized.

On August 14, 2025, an employee was assembling cables using a molding machine. When the machine was engaged, the mold came down and caught the employee's left hand, amputating three fingers.

On August 8, 2025, an employee was operating a table-top injection molding machine. He refilled the barrel of the machine with resin and began a pack procedure in which the plunger of the machine moved into the barrel to compress plastic pellets into the mix. The plunger caught and amputated his fingertip.

An employee was entering the manufacturing area when their finger became caught between a door and the door frame, resulting in an amputated finger.

An employee was working to move a pallet jack that had gotten stuck between the dock and the trailer. When the equipment was loosened, it struck the employee, throwing them backward onto the ground. The employee sustained fractured ribs and injury to their spleen and liver.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.