Struck against moving part of machinery or equipment · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Northtec, LLC, 200 CROSSINGS DRIVE, BRISTOL, PENNSYLVANIA 19007
on — Amputations, affecting the fingertip(s).
Watch Northtec, LLC — freeGet an email when a new federal OSHA severe-injury report for Northtec, LLC is published. One employer, no account, unsubscribe in one click.
Final narrative
While operating a paper cushioning machine, an employee's right hand contacted the cutting blade, amputating three fingertips.
HospitalizedAmputationFingertip(s)Special process machinery, n.e.c.
An employee was operating a strip saw. As the employee shut off the saw, their right index and middle fingertips were amputated by the blade before it came to a complete stop.
An employee was using a table saw to cut a piece of wood for wall framing. The wood jumped, causing the employee's hand to move toward the saw, amputating their left index finger and causing a laceration on their hand.
An employee was operating a trim saw. While trying to free a jammed board she had just cut, she came into contact with the running saw blade, which amputated her right thumb.
On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.
An employee was operating an extruder and performing a spool swap over from the right spindle to the left spindle. After rewiring the new spool, the employee's clothing got caught in the turning shaft when the left spindle started back up. The employee's left arm was pulled into the machine, resulting in a fractured humerus and lacerations to her triceps. She was hospitalized and required surgery.
An employee was resetting a warehouse racking system utilizing an order picker. They fell approximately 5 feet from the order picker to the concrete floor and sustained fractured ribs.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.