CERES MARINE TERMINALS, INC.

An employee was leaving a straddle carrier cab when the door slammed on the employee's finger, resulting in an amputation of the tip of the finger.

An employee was driving a yard hostler when he crashed into a terminal light post with a concrete base. He fractured his leg and was hospitalized.

An employee was walking to a container berth dock when he was struck from behind by a jockey truck. He suffered a separated right leg calf muscle, requiring hospitalization.

An employee was removing lashing turn-buckles on the bottom level of a container when a turn-buckle fell. The turn-buckle swivel crushed the employee's left middle finger between deck plating, and his fingertip had to be medically amputated.

An employee was working on a ship and dropped a lashing jack (lasher/header) on his foot and suffered an amputation to his first toe (big toe).

Employee 1 was operating a lift in a standing position. Employee 2 was operating a cherry picker and backing up through an aisle. The lift collided with the cherry picker and employee 1 fell off the lift after striking his right ankle on a wooden pallet that was on the cherry picker. The employee sustained a broken ankle.

An employee was operating a front-rider pallet jack from a freezer box to the loading dock when the vehicle collided with a stand-up forklift that was driving around a corner. The employee suffered multiple fractures in their left foot.

An employee was operating a forklift in reverse down an aisle when the vehicle collided with another forklift. The forks of the other forklift went into the employee's right leg, resulting in a right hairline leg fracture.

After moving empty containers with a forklift, an employee began to travel forward in the forklift. While re-entering the main aisle, the left fork struck the roll cage of an oncoming forklift that was travelling in reverse. This caused the injured employee's forklift to tip over onto a guardrail. The upper rail of the guardrail entered the top of the forklift's roll cage, pinning the employee's legs against the seat. The employee sustained a fractured leg.

An employee was operating a golf cart to retrieve and transport a ladder to the truck shop when they were struck by another vehicle at an intersection. The employee sustained head/brain injuries.

While preparing to install a new spool piece for a vapor and spent sulfuric acid line, an employee was working to ensure there was no residual product or pressure in the line before removing the 6-inch hose. The valve was cracked, and some spent acid still in the line sprayed out. The employee was standing off to the side and at a distance, but was still contacted by the hot acid, resulting in corrosive and thermal burns to their upper torso and mid-thighs of both legs.

An employee was driving a utility tractor rig when it struck the rear trailer of another utility tractor rig, which was traveling in the opposite direction. The glancing impact caused damage to the cab, and he sustained a laceration on right side of his face, a cervical fracture, two fractured left ribs, and a pelvic fracture. The employee was hospitalized.

The injured employee was standing by the controls for the electric spud system on the barge, preparing to raise the spuds. Meanwhile, an excavator was moving a mat on the deck. As the excavator swung from port to starboard, it's counterweight struck the injured employee s shoulder, causing them to lose balance and fall against the spud controls. The employee sustained bruises and contusions to their right shoulder and chest.

An employee was standing on the outside edge of a hopper barge while watching a skid steer push ore for an excavator (with a clamshell bucket) to unload. The excavator was on a work barge. The bucket of the excavator struck the employee and caused a near-amputation of their right arm and fractures of the ulna and radius of the left arm. The right arm required surgery.

An employee was inspecting a conveyor to see why it was not running. The employee entered the the conveyor motor area, tripped on a piece of angle iron welded to the floor, and fell. The employee sustained a fractured orbital bone.

A building engineer was inspecting a generator. As he closed the generator enclosure door, his right ring finger was caught between the door and the door frame. The fingertip was amputated.

An employee was walking back to a carrier case with mail in her hand when she tripped over a tub. Her back overarched as she fell, resulting in a fractured back that required hospitalization.

An employee was driving a utility tractor rig when it struck the rear trailer of another utility tractor rig, which was traveling in the opposite direction. The glancing impact caused damage to the cab, and he sustained a laceration on right side of his face, a cervical fracture, two fractured left ribs, and a pelvic fracture. The employee was hospitalized.

An employee was washing an aircraft from a scissor lift when they fell to the floor. The employee sustained a back injury and lacerations to their head and neck.

An employee was working with a drill and a metal cable. The drill caught the cable and caused an amputation to the employee's left ring finger.