Caught in running equipment or machinery during maintenance, cleaning · Bruises, contusions
At a glance
Federal OSHA recorded a severe workplace injury
at GRENADA STAMPING & ASSEMBLY, INC., 635 HIGHWAY 332, GRENADA, MISSISSIPPI 38901
on — Bruises, contusions, affecting the hand(s), unspecified.
Final narrative
A maintenance employee was cleaning straightening machine rollers with a rag when the rollers caught the rag and pulled the employee's left hand into the machine. The employee's hand was severely bruised.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 332116)
An employee was working to remove scrap from the vicinity of a scrap shaker tray located at the rear of a press when she suffered a laceration and partial amputation of her right index finger.
An employee was loading a die plate onto a rack when the plate tipped down and pinched his finger, lacerating it. The employee sustained an amputation.
An employee was placing a flattener die on a turret press. The die broke loose and fell into the turret. The employee's right hand was pinched between the turret and the die, resulting in a partial amputation of the little finger.
An employee was un-banding metal blanks from pallets. He stepped on a pallet where the boards of the pallet overhung the runners, causing him to lose his footing and fall to the floor. The employee sustained injury to his left hip requiring hospitalization.
An employee was checking a pole-type transformer tank for leaks. A hydraulic clamping device was lowered onto his right thumb and crushed it against the sharp edge of the bottom of the tank. He suffered a partial transphalangeal amputation to the thumb.
The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.
An employee was going into a trailer to mark product for shipment and the trailer pulled away from the dock. The employee fell out of the trailer, contacted the dock plate, and then fell to the ground. The employee was hospitalized with a punctured lung, fractured ribs, and contusions.
An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.
An employee was operating a gas tugger to lift metal sheeting. His left hand was pulled into the pulley, which crushed his left thumb, resulting in avulsions and other tissue damage. He was hospitalized and required surgery.