UFP Technologies, Inc.

An employee suffered a finger amputation while working on a CNC machine.

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

On July 22, 2025, an employee was cutting/torching a large piece of metal when a piece of the material broke loose, struck him mid-stomach, and knocked him to the ground. The employee was hospitalized with an umbilical hernia and fractures to his right femur and left fibula.

An employee was feeding material through a pinch roller. There was a line break and the employee was working to clear out the line. The closed roll grabbed his glove and pulled his entire arm through the machine. The employee sustained compartment syndrome and a broken fingertip requiring hospitalization.

An employee hooked up two bundles of steel tubing to be lifted with an overhead crane. He stumbled while walking and operating the crane and his right hand contacted the crane's pulley mechanism. The upward motion of the crane caused the cable to pull his finger into the pulley. The employee's fingertip was partially amputated.

An employee was taking equipment out of a trailer. He fell from the back of the trailer to the ground 3-4 feet below, breaking his left hip.

The employee was operating a peeler machine when his left hand got caught against the log that was being peeled. The employee was hospitalized with lacerations to the fingers on his left hand that required stitches.

An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.

Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.

An employee had been loading a double deck press. The employee saw a mold had been sent in with the C-hook still attached on the belly bar. As he went to remove the hook from the mold, his right thumb got caught on the C-hook. The employee's thumb was partially amputated.

An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.

An employee was delivering home heating fuel when bees came from the ground and stung the employee's face, neck, torso, and hands. The employee proceeded to shut off the oil flow before losing consciousness. They were hospitalized due to an anaphylactic reaction.