105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

TRACHTE BUILDING SYSTEMS, INC.

Caught in running equipment or machinery during regular operation · Amputations

Federal OSHA recorded a severe workplace injury at TRACHTE BUILDING SYSTEMS, INC., 314 WILBURN ROAD, SUN PRAIRIE, WISCONSIN 53590 on — Amputations, affecting the fingertip(s).

Watch Trachte Building Systems, INC. — free Get an email when a new federal OSHA severe-injury report for Trachte Building Systems, INC. is published. One employer, no account, unsubscribe in one click.

An employee was fabricating parts in a press brake. The employee bent a part and the part fell back. When the employee reached for the part, the press was activated via the foot pedal and pinched the employee's middle finger, amputating the fingertip.

Amputation Fingertip(s) Brake presses

Trachte Building Systems, Inc.

An employee was helping guide a forklift as it tipped a 2,190-pound steel coil upright. The coil started to tip over, and the employee's foot was caught under it. Her first, second, and third metatarsal bones were broken.

View TRACHTE BUILDING SYSTEMS, INC.'s full OSHA safety record →

Pall Corporation

An employee was operating a machine when a wire pulled his right glove resulting in amputation of the index and middle fingertips.

Koch Foods of Cincinnati

An employee was grinding chicken when their right index fingertip was caught in the grinder and amputated.

Stella-Jones Corporation

An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.

Mack Manufacturing, Inc.

An employee was passing through a large metal door when the door closed on the employee, resulting in a cracked rib.

Nutmeg Container Corporation

An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.

Meeco Sullivan

An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.

CSBS Manufacturing LLC

Two maintenance employees were dismantling a machine part (steel cylindrical rollers) on the ground. After unbolting a portion, part of the assembly fell approximately 6 inches onto one employee's left little finger. The employee was hospitalized and about 3/4" of their little finger above the top joint was surgically amputated.

Standard Structures, Inc.

An employee was moving and handling cardboard boxes when he sustained a laceration to his left ring finger from a box. The laceration became infected and required hospitalization and surgery.

Prime Metal Buildings & Components

An employee was positioning a piece of metal trim for a test bend in a single-fold bend machine. Their right middle fingertip was pinched by a clamp on the machine, resulting in a partial amputation.

Prime Metal Buildings & Components

An employee was operating a double folding machine and positioning a piece of metal trim in the folding clamps for a test bend. The machine activated and the crank (lower control arm that bends the trim) came up and cut through the employee s glove, amputating their right middle fingertip.

RG Professional Carpenter, Inc.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

General Thermodynamics, Inc.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

Sargento Foods Inc

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

Asher Enterprises, Inc.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

Consolidated Electrical Distributors Inc.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.