Best Qulity Labor, LLC

An employee was dismantling scaffolding from an elevated platform when they lost balance and fell 30 feet through an opening in the planking.

An employee was working on a roof. The employee fell through roof insulation to the ground 25-30 feet below, suffering a broken pelvis and collarbone.

An employee was performing grounds maintenance work. The employee stepped on the edge of a ventilation grate when it flipped over, causing the employee to fall about 30 feet to the ground below. They sustained two heel fractures and a left tibia fracture.

An employee removed a cover from a commercial air conditioning unit to change the filters and laid the cover over the A/C grating located at the bottom of the unit. While changing the filters, the employee stepped on the cover. The cover gave way and the employee fell through the grating, landing approximately 26 feet below on a concrete floor. The employee sustained a broken arm, a broken rib, and a punctured lung.

An employee was dismantling a four-tier scaffolding system. When the employee stepped on a wooden scaffold plank, it failed and the employee fell to the cement floor about 28 feet below. The employee was hospitalized for broken bones and body and head trauma.

An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.

Two maintenance employees were dismantling a machine part (steel cylindrical rollers) on the ground. After unbolting a portion, part of the assembly fell approximately 6 inches onto one employee's left little finger. The employee was hospitalized and about 3/4" of their little finger above the top joint was surgically amputated.

An employee was moving and handling cardboard boxes when he sustained a laceration to his left ring finger from a box. The laceration became infected and required hospitalization and surgery.

An employee was positioning a piece of metal trim for a test bend in a single-fold bend machine. Their right middle fingertip was pinched by a clamp on the machine, resulting in a partial amputation.

An employee was operating a double folding machine and positioning a piece of metal trim in the folding clamps for a test bend. The machine activated and the crank (lower control arm that bends the trim) came up and cut through the employee s glove, amputating their right middle fingertip.

A driver was exiting his vehicle outside the plant gate when his foot slipped on the top step of the truck. He fell to the ground, landed on his left hip and elbow. The employee was hospitalized with a fractured hip/femur.

A security employee was responding to an urgent call from staff regarding a violent patient. The employee tripped and fell on the floor outside of the stairwell. The employee sustained a closed head injury, contusion of the cerebrum without loss of consciousness, and a closed fracture of the distal end of the right radius.

A security employee was holstering her firearm when the gun discharged a bullet into her right leg. The employee was hospitalized.

A temporary employee was testing an electrical starter motor. He was placing tape on the starter while the breaker was not engaged, but the starter sent an arc flash that burned his hands and stomach.

An employee was walking on a sidewalk and stubbed his toe on an elevated portion of concrete, causing him to trip and fall. The employee's right knee was dislocated.