Caught in running equipment or machinery during regular operation · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Acushnet Rubber Company, Inc, 744 BELLEVILLE AVENUE, NEW BEDFORD, MASSACHUSETTS 02745
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was feeding material into an extruder when his right finger(s) were caught and amputated in the machine.
An employee had been loading a double deck press. The employee saw a mold had been sent in with the C-hook still attached on the belly bar. As he went to remove the hook from the mold, his right thumb got caught on the C-hook. The employee's thumb was partially amputated.
An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.
An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 339991)
An employee had been loading a double deck press. The employee saw a mold had been sent in with the C-hook still attached on the belly bar. As he went to remove the hook from the mold, his right thumb got caught on the C-hook. The employee's thumb was partially amputated.
An employee was performing stamping operations using a 160-ton press machine. They began to clean the machine when the press came down on their hand, resulting in multiple finger amputations.
An employee was feeding a ring into a horizontal winder when the ring got caught. As the employee was getting it to continue feeding into the machine, her right middle finger was caught in a pinch point on the machine's wheel. The fingertip was partially amputated.
An employee was operating a tape cutting machine, which automatically cuts 2-inch cloth material into predetermined lengths. The material became jammed in the blade, which froze in the partway down position. The employee began working to unjam the material. The machine activated, causing the blade to become free. The blade came down and amputated the employee's left index fingertip above the first knuckle and the tip of their left thumb.
An employee was adjusting a ring on a bar bending machine when their glove became caught in a pinch point on the machine. The machine was activated and the employee sustained fractures to the four fingers on their right hand and amputations to the index and little fingers.
An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.
Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.
An employee had been loading a double deck press. The employee saw a mold had been sent in with the C-hook still attached on the belly bar. As he went to remove the hook from the mold, his right thumb got caught on the C-hook. The employee's thumb was partially amputated.
An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.
An employee was delivering home heating fuel when bees came from the ground and stung the employee's face, neck, torso, and hands. The employee proceeded to shut off the oil flow before losing consciousness. They were hospitalized due to an anaphylactic reaction.