Injured by slipping or swinging object held by injured worker · Cuts, lacerations
At a glance
Federal OSHA recorded a severe workplace injury
at OMEGAFLEX, 451 CREAMERY WAY, EXTON, PENNSYLVANIA 19341
on — Cuts, lacerations, affecting the leg(s), unspecified.
Final narrative
An employee was using a utility knife to cut a zip tie that was securing a reel of flexible hose when the knife lacerated his left leg.
HospitalizedLeg(s), unspecifiedBox cutters and razor knives
An employee was using a saw to cut a piece of concrete when the piece gave way and pushed the saw into the employee's leg. The employee's leg was lacerated, requiring stitches and hospitalization.
An employee was grinding some hardfacing on a bulldozer blade when the 9-inch grinder kicked back and lacerated his left leg above the knee. The employee was hospitalized and required surgery.
An employee was operating a rotating tool to place thread protectors on the end of pipe. Her left hand was on the rotating part of the tool when the tool engaged, resulting in a left forearm fracture and a thumb laceration.
More severe injuries in this industry (NAICS 332912)
An employee was retooling a pipe bending machine while it was energized when the machine clamp function activated. Their left hand was caught as the machine's radius die closed on the clamp and it crushed his left ring finger, resulting in medical amputation to the second knuckle.
An employee was operating a hose/bender machine. He was reaching to adjust a piece of hose and got caught in a pinch point, sustaining an amputation to his finger.
On April 19, 2023, an employee was assembling a hose and performing a pull test. During the pull test, the employee's left index fingertip was amputated by the longitudinal pull tester.
On March 9, 2023, an employee was assembling manifolds. While pushing an end fitting into the hose of an automatic pushing machine, the employee suffered an amputation to the tip of the right index finger.
An employee was running a hone machining center and was walking around to the rear of the machine to evaluate a coolant pressure gauge. The employee tripped over a steel angle iron that was on the floor and sustained a fractured hip requiring hospitalization.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.