Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Kellogg's Company, 2050 State Rd, LANCASTER, PENNSYLVANIA 17601
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was trying to unjam the slide gate on a conveyor when the slide gate contacted and amputated his left middle fingertip. The device was not locked out at the time.
An employee was removing product build-up from the corners of the jump belt on a machine. The machine started and the employee's left thumb was caught between the guiderail and the belt. Their thumb tip was amputated.
An employee was removing a shred cooker lid. The employee's left middle finger was pinched between a spud wrench and a railing; the fingertip was amputated with no fracture or bone loss.
An employee was stocking shelves and opening a box with a box cutter. He leaned down on top of the box cutter, puncturing a vein in his elbow that required surgery.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 311230)
An employee was changing the belt of a sorting machine. He was on his knees, changing the drive belt under the machine, when lost his balance and hit his head on the framework. He suffered an injury that caused numbness in both arms and hands and was hospitalized.
An employee was removing product build-up from the corners of the jump belt on a machine. The machine started and the employee's left thumb was caught between the guiderail and the belt. Their thumb tip was amputated.
An employee was monitoring the food stream from the picker into a cooling valve when she saw a piece of plastic on the food. As she attempted to remove the plastic, the picker wrapped around and pulled her hand, resulting in an injury that required hospitalization.
An employee was installing a clean bran mash hopper when their right little finger was caught between the hopper and a pipe, resulting in a fingertip amputation.
An employee was at the top of a rolling step lock ladder taking a bolt out of a sprocket using a box wrench. When the bolt broke loose, the employee lost his balance and fell backward 4-5 feet onto the floor. He sustained fractures to the clavicle, scapula, and three ribs as well as a laceration to the back of his head.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.