Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at RonPak, Inc, 1 Nathan Sedley Rd, SHREVEPORT, LOUISIANA 71115
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was cleaning bag machine plates with a rag when the rag and his left hand were pulled into the machine, amputating his fingertip between a plate cylinder and impression roller. The machine was running at the time.
An employee was working on a machine with a coworker. The coworker jogged the machine without realizing that the employee's hand was inside. His left pinky was caught by the gears, and his fingertip had to be surgically amputated.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 322220)
An employee was working to clean a glue roller with a scraper tool. The tool and the employee's left thumb were pinched between two rollers, resulting in a partial amputation.
An employee was shadowing coworkers while in training on the wide extrusion line. The employee went to clean the roller with a rag and cleaner when his right index finger got caught between a powered roller and a rubber roller. The employee sustained an amputation to a finger.
While operating a machine, an employee noticed that a piece of plastic material was stuck to a chrome roll. The employee was removing the plastic when their arm came into contact with the rollers. The employee suffered a contusion to the upper arm between the elbow and the shoulder.
On June 9, 2025, a machine operator was using a sorting machine to sort/clean plastic sheets. While she was freeing stuck sheets on the lift table, the table engaged and crushed her against the top railing, trapping her torso. The employee was hospitalized with contusions to her back.
A driver was exiting his vehicle outside the plant gate when his foot slipped on the top step of the truck. He fell to the ground, landed on his left hip and elbow. The employee was hospitalized with a fractured hip/femur.
A security employee was responding to an urgent call from staff regarding a violent patient. The employee tripped and fell on the floor outside of the stairwell. The employee sustained a closed head injury, contusion of the cerebrum without loss of consciousness, and a closed fracture of the distal end of the right radius.
A temporary employee was testing an electrical starter motor. He was placing tape on the starter while the breaker was not engaged, but the starter sent an arc flash that burned his hands and stomach.
An employee was walking on a sidewalk and stubbed his toe on an elevated portion of concrete, causing him to trip and fall. The employee's right knee was dislocated.