Pella Corporation - Gettysburg Operation

An employee was walking back to her workstation. A forklift reversed a short distance, then completed a U-turn and struck her, running over her lower extremities. She was hospitalized with a broken ankle.

An employee was training on a jockey truck. Upon stepping out of the truck, the employee was struck by a rubber tire gantry crane, resulting in amputations of the right leg above the knee and left leg below the knee.

An employee was standing at the rear of a double pallet jack. Another double jack approached, and the employee's lower leg was caught between the two pieces of equipment. He suffered a broken tibia and fibula.

An employee was unloading large material bags on a loading dock. A forklift tine pinned the employee's foot against a pallet, causing the employee to fall and suffer a broken ankle.

An employee was pushing a container when they were struck by a forklift. The employee sustained a left leg fracture.

An employee had been unloading material from a drop table. When the employee reached to remove parts from a bin, the drop table came down on their right middle finger. The fingertip was amputated.

An employee was loading sliding doors and window panels onto a truck when the sliding doors fell on top of them. The employee sustained a pelvis fracture and internal injuries and was hospitalized.

The injured employee was working alongside a trainer. The trainer was adjusting the side fences that hold the wood in place as it passes through the molder. The injured employee was using compressed air to clean the area. They went to remove a sliver of wood to prevent a potential jam. The rollers activated, which processed material through the machine, caught the employee s glove, and pulled their hand toward the cutting head of the molder. The employee sustained lacerations to their right middle and ring fingers and an amputation to the distal phalanx of the middle finger.

On August 11, 2025, an employee was operating a clamping machine that used two pneumatic cylinders to clamp boards together for gluing. While he was positioning a board, the control was activated and the clamp on one side of the machine closed. A fingertip on his right hand was caught between the clamp and the board. He suffered an amputation to the fingertip (involving a torn fingernail and surrounding skin) as well as a fracture to the last joint of the finger.

On July 21, 2025, an employee was working from a 10-foot step ladder while installing a 3-by-5-foot glass window pane on the outside of a new home under construction. The window fell from the frame and the employee went to catch it when the ladder slipped. The employee fell 5 feet to the ground and landed on small pieces of concrete left over from the foundation pour. The employee was hospitalized with a dislocated elbow and fractured wrist that required surgery.

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.