United Dairy

A valve on a tanker truck actuated while an employee was putting in a part. It amputated about 1/8 inch of the employee's fingertip.

On January 26, 2017, at approximately 12:45 PM, an employee was injured while pulling crates of milk from the energized floor track. A stack of product cases became hung up on the floor track. Using a metal hook, the employee attempted to unjam the cases. The track popped up and caught the employee's left ankle between the track and the metal side barrier on the track resulting in a broken ankle. The employee was hospitalized for surgery.

An employee was changing mud cups in the hopper cylinders of a concrete pump truck. The cylinders moved and three of the employees fingers were amputated.

An employee was standing on the rig floor next to a polishing unit. His hand was placed on the polishing unit when the pump was lowered, resulting in amputation of their right thumb, ring, and middle fingertips.

An employee was using air to blow out the air wash to the blender and grinder station. As the employee reached to verify that the air wash was clean, the unit pinched and amputated their fingertip.

An employee was retrieving a lost drill pipe with a lifting bail when their left thumb got pinched between the table and handle of the lifting bail while trying to re-thread the pipe to lift it out. The employee suffered an amputation to the left thumb.

An employee was removing a core chuck from a stationary roll when their right ring finger was pinched between the chuck and the roll. The employee's fingertip was amputated.

An employee was lifting a crate of dairy product and felt severe back pain. The employee was hospitalized with a burst blood vessel in their lower back.

An employee was walking between two production lines when he tripped and fell over a pallet that had some equipment on it. The employee fell on his right side, resulting in a fractured hip and a possible thumb injury.

An employee was using a stand-up forklift to load a small box truck. As he was putting down a pallet to push it onto a truck, the weight caused the truck to move forward. This pulled the forklift forward and it dropped between the truck and the loading dock, causing partial amputations to their left little and ring fingers.

An employee was unloading product from a trailer onto a scissor lift. They stepped backward and fell approximately 5 feet from the scissor lift to the concrete floor, sustaining six broken ribs and a punctured lung.

An employee was removing cheese product from the top of a conveyor belt. His right ring finger got pulled under the metal product guide rail at the edge of the conveyor and was pinched between the conveyor and the guide rail. The employee sustained an amputation of the fingertip between the first knuckle and the fingernail.

An employee tripped over a concrete curb stop in a parking lot. The employee fell to the ground, landing on their left hip and breaking it.

An employee was conducting routine maintenance on a mixer. New lid pins had been installed, and the employee was rotating by hand to ensure they had been installed correctly. The employee's left middle finger was caught between the lid and top of a pin. The momentum from the mixer continued, causing a crushing injury to the finger. The employee underwent a medical amputation from the top knuckle to the tip of the finger.

An employee was climbing down a ladder when it slipped. The employee fell, suffering a broken scapula and broken ribs. The employee was hospitalized.

An employee was climbing down a 15-foot multipurpose ladder. The employee fell about 8 feet, landing on the concrete floor and the ladder itself. The employee suffered several injuries, all on the right side: broken ribs, a broken sternum, a broken temporal bone, broken shoulder, multiple fractures to the cheekbone, and a brain bleed.

An employee was rolling up the landing gear on his trailer when the handle began to unwind and struck his face, fracturing his jaw. The employee was hospitalized and required surgery.