HARPER CONSTRUCTION

On December 13, 2023, an employee was operating a forklift. When they stepped off the forklift, it crushed their left foot between the lift and a racking system. The employee suffered a foot fracture that required hospitalization.

An employee was maneuvering a motorized pallet jack while standing in front of it. He became pinned between the pallet jack and a steel rack cross-beam, resulting in a contusion to his chest/back and a fractured rib.

An employee was stacking empty drums into a trailer. The employee then exited the trailer, using the forks of a forklift as a step. The forklift's parking brake failed, causing the forklift to move forward and pin the employee's right leg between the forklift and the trailer. The employee's right lower leg was crushed, resulting in a fracture and a laceration.

An employee had been spraying weeds behind a school. As he was leaving the field, the employee drove his truck up to the gate, got out, and opened the gate. The truck rolled forward and pinned him against the fence/gate. The gate then gave way and opened from the force of the truck. The employee's left index fingertip got caught in the fence/gate and was amputated.

An employee was using a walk-behind tugger to pull a grinder. The employee's left little finger was pinched between the handle of the tugger and the framework of a staircase. The employee's fingertip was amputated.

An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.

An employee was assisting the crew with patching and restoring a roadway after the installation of a sewer line. He was helping place and level the blacktop/backfill material over the trench area to bring the road surface back to proper grade. The employee was walking between a forward-moving dump truck and a dirt pile when his right foot was run over by the truck s wheel, causing him to fall. The employee sustained injury to his foot.

An employee was rigging I-beams. An I-beam slid off the stack of I-beams and fractured the employee's leg.

An employee was operating a skid steer with a bucket attachment at a demolition site. While driving it to the rear of the property to park it, the employee came into contact with a live electrical transformer unit that was located outside of the facility. The employee sustained electrical burns on his hands extending up to his elbows and a fractured ankle.

An employee was installing a door on a semi-trailer. They were using a forklift to lift the door to the height of the trailer when the door became jammed between the forklift mast and the hinge on the trailer. When the employee went to dislodge the door from the mast, the door fell and crushed their foot. Their big toe was amputated. The employee was hospitalized and their big toe was surgically reattached. The employee's foot and other toes also required surgery.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.