ALLAN A. MYERS

On December 13, 2023, an employee was operating a forklift. When they stepped off the forklift, it crushed their left foot between the lift and a racking system. The employee suffered a foot fracture that required hospitalization.

An employee was maneuvering a motorized pallet jack while standing in front of it. He became pinned between the pallet jack and a steel rack cross-beam, resulting in a contusion to his chest/back and a fractured rib.

An employee was stacking empty drums into a trailer. The employee then exited the trailer, using the forks of a forklift as a step. The forklift's parking brake failed, causing the forklift to move forward and pin the employee's right leg between the forklift and the trailer. The employee's right lower leg was crushed, resulting in a fracture and a laceration.

An employee had been spraying weeds behind a school. As he was leaving the field, the employee drove his truck up to the gate, got out, and opened the gate. The truck rolled forward and pinned him against the fence/gate. The gate then gave way and opened from the force of the truck. The employee's left index fingertip got caught in the fence/gate and was amputated.

An employee was using a walk-behind tugger to pull a grinder. The employee's left little finger was pinched between the handle of the tugger and the framework of a staircase. The employee's fingertip was amputated.

An employee was fixing a broken purlin at a worksite when they fell from the framing to the concrete floor approximately 19 feet below. The employee sustained brain bleeding and fractures to their face, vertebrae, and wrists.

Employees were removing scaffolding that was used to repair an ion exchange tank. The line was undergoing the regen process when a piece of scaffold struck a PVC pipe that transported hydrochloric acid (HCl). The injured employee was placing material inside a scaffold rack when he was sprayed in the face with HCl and sustained chemical burns to his eyes, face, chest, right arm, and left leg.

An employee was moving a ramming machine to a staging area. While using the controls on the side of the machine, there was a sudden heavy rainfall causing the equipment to slide. The ramming machine tipped over and caught the employee against the ground. The employee sustained a fracture to the right side of their pelvis and was hospitalized.

The injured employee was training a new employee on a dough machine. She went to show where the batter comes from and her right index fingertip was cut. The employee sustained an amputation to the fingertip. The machine was not guarded at the time of the incident.

An employee was operating a roller machine on a dirt slope when the machine hit a bump and fell onto it's side. While trying to get free of the falling machine, the employee's legs were pinned by the top bar of the cage. The employee was hospitalized and his left leg was amputated. He also sustained fractures to a hand and finger.

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.