105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Chaparral Boats Inc.

Struck by falling part of powered vehicle still attached · Amputations

Federal OSHA recorded a severe workplace injury at Chaparral Boats Inc., 300 Industrial Blvd., NASHVILLE, GEORGIA 31639 on — Amputations, affecting the toes(s), toenail(s).

Watch Chaparral Boats Inc. — free Get an email when a new federal OSHA severe-injury report for Chaparral Boats Inc. is published. One employer, no account, unsubscribe in one click.

An employee was preparing a finished boat for shipment. He was placing a battery in the motor box when the lid of the box inadvertently closed and crushed his right big toe, amputating part of the bone.

Amputation Toes(s), toenail(s) Motorboat, motorized yacht

Chaparral Boats, Inc.

An employee was placing a shrink wrap cover over a boat when he fell off the boat, hitting his head on the concrete floor.

Chaparral Boats, Inc.

An employee was assisting in the rotation of a boat hull mold when his left ring finger was caught between the mold and the frame used to hold the mold, resulting in a partial amputation.

Chaparral Boats Inc.

An employee was strapping a boat mold onto a trailer when he lost consciousness due to heat exhaustion and fell to the ground. The employee sustained a laceration to the head from striking the ground.

Chaparral Boats, Inc.

An employee was cleaning a finished boat after completing the manufacturing process. The employee moved to the rear of the boat to retrieve finishing pieces and fell approximately 56 inches to the concrete floor, fracturing the L5 vertebra.

Chaparral Boats Inc.

An employee was rolling fiberglass and was not feeling well. When other workers helped her sit down, she suffered an altered level of consciousness. She became severely lethargic and was cold and clammy to the touch. She was hospitalized overnight for heat exhaustion.

View Chaparral Boats Inc.'s full OSHA safety record →

Matthews International Corporation

An employee was fixing a mechanical casket lift in a vehicle when the lift came down on their left-hand fingers, resulting in amputation of two fingers.

Walgreens Distribution Center

An employee was helping to remove the clamp attachment paddles from a forklift so they could then repair a hydraulic leak. The clamp fell and pinned the employee's right ring finger against the mast. The employee's finger was partially amputated.

Beacon Building Products

An employee was on a truck attempting to stow an aluminum extension ladder onto the truck's conveyor boom system. As the conveyor mast was lowered, the boom control area came down on top of the employee's left foot, resulting in two toe fractures.

Frontier Forklifts & Services

An employee was standing on the elevated forks of a forklift to install the fork chain anchor nut. The employee slipped and as he went to catch himself, he accidentally engaged the up-down control for the forks. This caused the forks to fall onto his foot. The employee's right foot was crushed and all of his right toes were amputated.

United Rentals - Aerial

An employee was working on a scissor lift when a portion of the unit came down and struck their head at the lift base. The employee sustained a head laceration and a skull fracture.

Boston Whaler, Inc.

An employee was unbinding material that was caught in a horizontal band saw. The became unbound and it re-engaged while the employee was reaching for the blade. Two of the employee's fingers were amputated.

Boston Whaler, Inc.

An employee was working on a ship in the sun when they began experiencing symptoms of heat exhaustion, resulting in hospitalization.

Bertram Yachts

An employee was working in the hull of a boat, applying resin as part of lamination activities. He sat down and lost consciousness due to heat exhaustion. The employee was hospitalized.

Marine Mat, Inc.

An employee was operating a surfacing machine that used a rotating wire brush in a cabinet. A sheet of EVA foam material became stuck in the machine; as the employee was removing it, the wire brush contacted his left hand. He suffered a fracture and abrasions to the left arm.

Marine Mat, Inc.

An employee was operating a CNC machine. The employee lifted the guard and went to clean a part. The tooling was still rotating and caught the employee's glove, pulling it into the tooling and amputating their left ring finger.

GS II Building Products, Inc.

An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.

US Battery Manufacturing Company, Inc

A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.

Alfa Insurance

During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.

EMORY UNIVERSITY HOSPITAL

An employee slipped on condensation on a walkway in a parking garage. She fell and suffered a closed fracture to the neck of the left femur.

Bull Moose Tube

An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.