Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Mold Rite Plastics, 1 Plant Street, PLATTSBURGH, NEW YORK 12901
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was working on a locked-out machine, which had a chain with slack. He then unlocked the machine and activated it. He was tapping the machine to see if it would speed up when his left distal finger was caught and partially amputated by the chain and sprocket.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 326121)
An employee was blowing out material in the blow-out booth when the silo magnet came down on his left hand, amputating the index and middle fingertips.
At the maintenance shop, an employee was drilling plastic parts using a drill press. The employee's left glove got caught in the drill, and half of her left ring finger and her left little fingertip were amputated.
A maintenance technician was servicing an extruder and removed the cam locking pin on a hot water/steam line to change a water hose. Hot water/steam sprayed out, striking the employee on the right forearm and the right side of their neck. The employee sustained burns to their neck, right forearm, and right leg.
An employee was entering an area while carrying a tray containing 20 pounds of product. A plastic curtain came into contact with the employee's shoulder; the employee suffered a herniated disc while dislodging the curtain.
An employee was working on a cutting line that utilized a machine to pull material through the line. The employee was turning a roller to feed material into the machine when their left hand was caught between the rollers, resulting in abrasions and a dislocated thumb. The employee was hospitalized and required surgery on the thumb.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.