Struck by dislodged flying object, particle · Multiple traumatic injuries and disorders, n.e.c.
At a glance
Federal OSHA recorded a severe workplace injury
at Swanson Industries, Inc., Goshen Road Repair Center, MORGANTOWN, WEST VIRGINIA 26508
on — Multiple traumatic injuries and disorders, n.e.c., affecting the multiple trunk locations.
Final narrative
On February 17, 2017, at approximately 9:45 a.m., an employee was tightening a cylinder gland into the chuck of a lathe. The employee dropped the chuck wrench, which struck the lathe engagement lever, causing the lathe to actuate and eject the part. The part struck the employee, who was hospitalized with a back strain and contusions to the stomach and chest.
HospitalizedMultiple trunk locationsParts and materials, unspecified
An employee was assembling a hydraulic cylinder and rod assembly with the gland on it for a ram car. A crane was used to support the rod while it was partially lowered into the cylinder to start the gland. As the employee was pushing down on the gland to start engagement of the threads in the cylinder some slack was left in the chain holding the rod, allowing the rod to drop and pinch his fingertips between the rod eye and the gland. When the rod dropped down into the cylinder his right index and middle fingertips were pinched off between the rod eye and the gland.
On February 16, 2017, at approximately 3:05 p.m., an employee was walking through the shop when he stepped into a deep hole in the concrete floor, twisted his ankle, and fell, fracturing his left shoulder.
An employee was tossing a damaged toilet into a compactor. The toilet bounced off the compactor and lacerated the employee's right wrist, cutting an artery and tendon.
An employee was operating a hydraulic jack to bend a frame when the jack came loose and struck the employee. They were hospitalized for a spleen injury.
A truck had been towed into the shop with a flat tire and a blown airbag. An employee checked the tire for damage and was airing the tire. The employee was installing the valve core when the bead slipped off the rim. Air escaped, and the aluminum wheel struck the employee's head and face. The employee became unresponsive and was bleeding.
On December 14, 2023, at 8:40 p.m., three employees were inspecting milling machines for startup. A few of the sleeves on the mill drum needed to be changed out. The injured employee was trying to input a sleeve on the mill drum using a hammer. The hammer hit the edge of the drum, which caused a metal piece to splinter off and strike the employee's cheek just below the left eye. The metal splinter embedded in the back of their eye socket, resulting in pain, swelling, and bleeding that required hospitalization.
An employee was pushing a line of carts into a vestibule when the door cable snapped and struck his right ankle. The employee suffered a fracture that required surgery and hospitalization.
More severe injuries in this industry (NAICS 332813)
An employee placed an aluminum step ladder beside a tractor trailer and was removing a piece of scrap aluminum from the trailer that resulted from a motor vehicle accident. While coming down the ladder, the employee fell approximately 6 feet to the concrete. The employee was hospitalized with a fractured T4 vertebra.
On August 26, 2025, an employee was repairing a pipe at a tank. The employee fell and slid down the tank, suffering severe lacerations to the lower arms. The employee was hospitalized.
On August 26, 2025, a temporary employee was assisting a mechanic. The employee was on an overhead crane, removing a chain hoist attachment over a large plating tank. When the platform of the crane was moved, the employee became caught between the platform's railing and a support beam. The employee sustained a punctured lung and fractures to their clavicles, humerus, and ribs.
An employee was adding an all purpose soak and electro cleaner chemical to a water tank to make a cleaner bath. An exothermic reaction caused the 200 F water to splash on him, and he suffered hot water and steam burns to the right side of his face, his upper right arm, the right side of his torso, and his right leg.
At 3:00 AM, on 2/18/2025, an employee was mixing chemicals. The employee had difficulty breathing due to inhalation of unknown chemicals. The employee was hospitalized.
An employee was conducting routine maintenance on a mixer. New lid pins had been installed, and the employee was rotating by hand to ensure they had been installed correctly. The employee's left middle finger was caught between the lid and top of a pin. The momentum from the mixer continued, causing a crushing injury to the finger. The employee underwent a medical amputation from the top knuckle to the tip of the finger.
An employee was climbing down a 15-foot multipurpose ladder. The employee fell about 8 feet, landing on the concrete floor and the ladder itself. The employee suffered several injuries, all on the right side: broken ribs, a broken sternum, a broken temporal bone, broken shoulder, multiple fractures to the cheekbone, and a brain bleed.
An employee was rolling up the landing gear on his trailer when the handle began to unwind and struck his face, fracturing his jaw. The employee was hospitalized and required surgery.