Contact with hot objects or substances · Third or fourth degree heat (thermal) burns
At a glance
Federal OSHA recorded a severe workplace injury
at North American Industrial Services, Inc., Covanta Energy, AGAWAM, MASSACHUSETTS 01001
on — Third or fourth degree heat (thermal) burns, affecting the multiple body parts, unspecified.
Final narrative
An employee was inside the boiler removing broken pieces of refractory from the hopper using a water hose when the wall directly in front of the employee released hot ash and refractory onto the employee. The employee rolled into the hopper and was engulfed by the hot ash and debris. The employee suffered burns to 65% of his body ranging from first to third degree burns. The worst of the burns were to his legs and ankles.
HospitalizedMultiple body parts, unspecifiedScrap, waste, debris, n.e.c.
More severe injuries at North American Industrial Services, Inc.
An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.
An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.
An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.
An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.
More severe injuries in this industry (NAICS 561790)
An employee was making copies at the copy machine. While walking away from the copy machine, her heel snagged on the carpet in the office and she fell. The employee sustained a fractured shoulder.
An employee was operating a vacuum truck, using the controls to raise the bed. As it rose, the bed touched an overhead power line. Electricity passed through the employee, entering through their left hand and exiting through their left toe.
An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.
Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.
An employee had been loading a double deck press. The employee saw a mold had been sent in with the C-hook still attached on the belly bar. As he went to remove the hook from the mold, his right thumb got caught on the C-hook. The employee's thumb was partially amputated.
An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.
An employee was delivering home heating fuel when bees came from the ground and stung the employee's face, neck, torso, and hands. The employee proceeded to shut off the oil flow before losing consciousness. They were hospitalized due to an anaphylactic reaction.