HINO MOTORS MANUFACTURING U.S.A., INC.

An employee pulled the west end of the rails apart to apply the hoist straps. As the employee proceeded to the east end of the side rails to pull the unit apart, a coworker pulled the east end. The west end side rails then fell onto the employee's right foot.

On Wednesday, 01/07/2015 at 3:45 a.m., an employee working on the 180 L Differential Assembly machine and the conveyor belt system dropped a wrench. In an attempt to retrieve the wrench from between the conveyor system and the 180 L Assembly machine, her right arm was caught by the 180 L machine, resulting in a laceration and an overnight hospital stay.

An employee was using a saw to cut a piece of concrete when the piece gave way and pushed the saw into the employee's leg. The employee's leg was lacerated, requiring stitches and hospitalization.

An employee was using a utility knife to cut honeycomb paper when the knife amputated their left index fingertip.

An employee was cleaning a resident's chimney. While using a drill, the employee's glove became caught in the drill and their finger was fractured.

An employee was grinding some hardfacing on a bulldozer blade when the 9-inch grinder kicked back and lacerated his left leg above the knee. The employee was hospitalized and required surgery.

An employee was operating a rotating tool to place thread protectors on the end of pipe. Her left hand was on the rotating part of the tool when the tool engaged, resulting in a left forearm fracture and a thumb laceration.

An employee was descending a ladder when their foot caught on the edge of the bottom step. The employee fell and struck the floor, landing on their left hip and suffering a hip fracture that required hospitalization and surgery.

An employee had loaded parts into his van and was pulling an empty utility cart back into the store. The wheels of the cart got caught in the doorway. When the employee pulled it through, the cart fell over onto him and he fell to the floor, landing on his right hip. The employee's hip was fractured.

An employee was found on the floor within the enclosure of a laser machine. The employee was adjusting a sheet of metal on the machine while carrying a remote control, which actuated the machine, moving the carriage and causing the employee to be caught between the carriage and the machine table. The employee was hospitalized with a broken right shoulder and left ankle, and lacerations on their legs and ankles.

An employee was wrapping pallets using a plastic wrap dispenser when he felt a pop in his back along with a burning and stabbing sensation. The employee sustained the herniation of discs L4 and L5.

An employee was working at the end of a ramp when a powered industrial truck rolled down the ramp and broke the employee's foot.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.