105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Bluescope Buildings North America Inc.

Compressed or pinched by shifting objects or equipment · Amputations

Federal OSHA recorded a severe workplace injury at Bluescope Buildings North America Inc., 400 N Weaber Street, ANNVILLE, PENNSYLVANIA 17003 on — Amputations, affecting the fingertip(s).

An employee was changing the die on a roll forming machine. The drive shaft fell pinching the employee's left pinky finger in a pinch point resulting in a fingertip amputation.

Amputation Fingertip(s) Rolling mills, rolling, calendering machinery

BlueScope Buildings North America, Inc.

An employee was operating a stand-up cart tugger and was returning from delivering a cart of I-beams to a staging area. The vehicle struck a rock on the concrete pad and then suddenly swerved to the left. The employee lost balance and fell out of the vehicle, landing on his hip. The employee was hospitalized with a fractured right hip and required surgery.

Bluescope Buildings North America, Inc.

An employee was adjusting metal stock in a hydraulic press. The press was activated and its cutting blade came down on the employee's arm, breaking bones and causing ligament and artery damage that required surgery.

BlueScope Buildings North America, Inc.

Two employees were in a scissor lift surveying storm damage on a roof panel. One of the employees fell from the lift cage to the concrete below and fractured their back.

Bluescope Buildings North America, Inc.

An employee was standing near stacked steel beams, using a handheld remote to raise the top beam with a crane. When the beam was lifted up, the bottom beam became unstable and shifted off the dunnage onto the employee's right leg. The employee suffered a compound fracture of the lower leg.

BLUESCOPE BUILDINGS NORTH AMERICA, INC.

An employee was operating a press when their right thumb became caught in the machine, resulting in amputation of the right thumb.

View Bluescope Buildings North America Inc.'s full OSHA safety record →

TForce Freight

An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.

Liveo Research, Inc.

An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.

Best Pump and Flow

An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.

FORD MOTOR COMPANY

During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.

Lasseter Tractor Company. Inc.

An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.

Meeco Sullivan

An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.

CSBS Manufacturing LLC

Two maintenance employees were dismantling a machine part (steel cylindrical rollers) on the ground. After unbolting a portion, part of the assembly fell approximately 6 inches onto one employee's left little finger. The employee was hospitalized and about 3/4" of their little finger above the top joint was surgically amputated.

Standard Structures, Inc.

An employee was moving and handling cardboard boxes when he sustained a laceration to his left ring finger from a box. The laceration became infected and required hospitalization and surgery.

Prime Metal Buildings & Components

An employee was positioning a piece of metal trim for a test bend in a single-fold bend machine. Their right middle fingertip was pinched by a clamp on the machine, resulting in a partial amputation.

Prime Metal Buildings & Components

An employee was operating a double folding machine and positioning a piece of metal trim in the folding clamps for a test bend. The machine activated and the crank (lower control arm that bends the trim) came up and cut through the employee s glove, amputating their right middle fingertip.

Main Line Clinical Labs

An employee was closing a door when the door closed on their right index finger, resulting in a fingertip amputation.

Ardent Mills

An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.

Zimmerman & Herr

An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.

McAneny Brothers, Inc.

An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.

Metz Culinary Management LLC

An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.