Joseph Campione, Inc.

An employee was working in the proofer room, scoring and aligning dough on the conveyor line, when the conveyor moved and caught the employee between the conveyor table and a structure in the room. The employee suffered a collapsed lung, lacerated liver, and broken spine.

An employee was changing a saw blade when the saw machine activated. The employee's left ring and little fingers were amputated.

An employee was clearing a jam from the label cutting machine when their left middle finger was partially amputated.

Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.

An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.

An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.

An employee (who had recently walked through water accumulated on the floor) slipped and fell to the floor. The employee suffered a broken right wrist and right elbow and was hospitalized, requiring surgery.

An employee was performing maintenance on a production line, requiring a testing and positioning phase for the whipped cream dispensers. The employee was positioning the dispensers using wrenches when one of the sensors was triggered by the pie pans coming down the line. The depositor heads lowered and pinched the employee's left ring finger, resulting in an amputated fingertip. The whipped cream dispensers were not guarded at the time and the line was not locked out/tagged out.

During a line changeover, an employee was rinsing a depositor with water. The employee was working to remove a piece of chocolate, stuck in the machine's roller, when the roller's moving parts caught his middle finger. He suffered an amputation to the fingertip with bone loss.

An employee was emptying a trash can into a dumpster. He tripped while turning around, fell over a rail onto the concrete floor, and broke bones in his back and wrist.

During a changeover, an employee was wiping down the dough chunker machine and the chunker closed on his left hand. The employee sustained crushing/laceration injuries, requiring hospitalization and surgery.

The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.

An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.

A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.

An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.

An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.