New York Geomatics, Inc.

An employee was walking in an aisle when a forklift backed up over her foot, resulting in a skin injury that required surgery to repair.

An employee was looking into the bucket of a front-end loader to see how much material was in it. A skid steer backed into the employee, who then fell into the edge of the front loader's bucket and suffered internal bleeding in the abdominal area.

An employee was spotting for a forklift operation. The forklift backed over the employee, who suffered a complete amputation to one lower leg and a partial amputation to the other leg. The employee was hospitalized.

An employee was cleaning his work area and preparing it to begin making air-set molds when a nearby forklift that was backing out from a load swung around and struck the employee. They sustained a lower left leg fracture.

An employee was walking around a work area when he was struck by a forklift that was backing up, resulting in several broken bones in his foot.

An employee was performing surveying work and was actively engaged in laying out geophysical nodes as part of a seismic exploration project. This task required the employee to carry and place geophysical equipment at specific intervals along the survey path, under outdoor environmental conditions. The employee sustained heat stroke.

An employee was opening a metal gate and went to open the lock when a wasp stung her hand. The employee sustained an allergic reaction.

At about 9:15 a.m. on March 10, 2025, an employee was riding along a hardpack snow-covered roadway on a snowmobile. The snowmobile went over a berm and tipped/rolled, causing the employee to fall to the ground. He suffered a collapsed left lung and was hospitalized.

A survey instrument operator was watching the survey crew chief perform a topographic survey on an existing bridge abutment wingwall. The employee moved down the side slope behind the wingwall to take survey shots of the top of the wingwall. He slipped and fell over a 15-foot abutment wall, onto wood brush and the ground below, landing on his back. The employee sustained a fractured vertebra in his back.

An employee was working on the outside of the facility when they were struck by a forklift, resulting in fractures to their nose, three ribs, and left leg.

An employee was cleaning leaves with a backpack blower when he fell from a ladder, resulting in injuries to his head, neck, and back.

An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.

An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.

An employee's right middle finger was caught in a nip point. The employee suffered an amputation to the middle finger at the first knuckle.

An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.