KRUM, TEXAS—
Mastec Advanced Technologies
Injured by slipping or swinging object held by injured worker · Puncture wounds, except gunshot wounds
At a glance
Federal OSHA recorded a severe workplace injury at Mastec Advanced Technologies, 430 Jackso, KRUM, TEXAS 76249 on — Puncture wounds, except gunshot wounds, affecting the hand(s), except finger(s).
Final narrative
An employee was running cable through a wall and attaching it to a wall plate. He needed another screw to attach the plate to the wall. When he drilled the screw, it drilled through his left hand.
More severe injuries at Mastec Advanced Technologies
NEW ULM, TEXAS—
MasTec Advanced Technologies
An employee was working on a satellite installation. They were reaching to grab a piece of cable when they were bitten on the left hand by a copperhead snake.
FINDLAY, OHIO—
Mastec Advanced Technologies.
On April 26, 2023, at 9:50 AM, an employee was installing a ladder rack on a company vehicle when the lowering arm of the ladder rack shifted, causing a bolt to slip and catch the wedding ring on his left ring finger. The employee sustained a laceration/avulsion to the left ring finger between the first and second knuckles that required hospitalization.
DAYTONA BEACH, FLORIDA—
MasTec Advanced Technologies
An employee was dismounting a TV from a wall mount at a customer's residence when his left hand was lacerated by the TV and/or the bracket on the wall. The employee required surgery.
PEMBROKE PINES, FLORIDA—
MasTec Advanced Technologies
An employee was installing a satellite dish from a ladder. The employee slipped from the ladder, which lacerated the employee's bicep. The employee was hospitalized.
LARKSVILLE, PENNSYLVANIA—
MasTec Advanced Technologies
An employee was attempting to install ladder clamps to secure an extension ladder in preparation for the work activity and fell approximately 14 feet from the ladder, resulting in multiple hip fractures and a shoulder injury.
View Mastec Advanced Technologies's full OSHA safety record →
Similar incidents · Same event type
MATHIS, TEXAS—
Mako Contracting, LLC
An employee was using a saw to cut a piece of concrete when the piece gave way and pushed the saw into the employee's leg. The employee's leg was lacerated, requiring stitches and hospitalization.
TOPTON, PENNSYLVANIA—
East Penn Manufacturing
An employee was using a utility knife to cut honeycomb paper when the knife amputated their left index fingertip.
NEW LENOX, ILLINOIS—
Ash Brothers Fireplace and Chimney Co
An employee was cleaning a resident's chimney. While using a drill, the employee's glove became caught in the drill and their finger was fractured.
RAPID CITY, SOUTH DAKOTA—
RPM & Associates Inc
An employee was grinding some hardfacing on a bulldozer blade when the 9-inch grinder kicked back and lacerated his left leg above the knee. The employee was hospitalized and required surgery.
BLYTHEVILLE, ARKANSAS—
Tenaris Hickman
An employee was operating a rotating tool to place thread protectors on the end of pipe. Her left hand was on the rotating part of the tool when the tool engaged, resulting in a left forearm fracture and a thumb laceration.
More severe injuries in this industry (NAICS 238210)
WASHINGTON, DISTRICT OF COLUMBIA—
Smart Building Technologies - A Fidelity Company
An employee was troubleshooting the control setup for a variable air volume box above a ceiling. The employee's hand came into contact with an exposed, energized 277-volt wire that had loosened from its terminal on the box's assembly. He was shocked and fell off a ladder. His left hand passed across the ceiling grid and was lacerated. He also suffered an electrical burn to the right hand and was hospitalized.
CANTON, OHIO—
Abbott Electric Inc
An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.
AVENTURA, FLORIDA—
Mintcrest Corp
An employee was standing on an A-frame ladder approximately 6 feet above the floor while he attached a suspended light fixture to the ceiling. The employee lost balance, and fell to the tiled floor below, sustaining blunt force trauma to his head.
KUNA, IDAHO—
Cupertino Electric, Inc.
An employee was inspecting the overhead area of a single-person lift and repositioning the lift through a double doorway. As they were transitioning through the doorway, they were caught between the doorframe and the vertical mast of the lift. The employee was hospitalized with injuries to the nose, left maxillary sinus, left orbital bone, and left jaw, with fractures at the maxillary sinus area.
AURORA, ILLINOIS—
Swedberg Electric, LLC
The injured employee was performing routine maintenance on a fan belt/pulley. The injured employee and another person were moving the pulley back and forth manually to find a bearing issue. The injured employee's left ring finger got caught between the belt and the pulley wheel, resulting in a soft tissue amputation.
More severe injuries in TEXAS
EAST BERNARD, TEXAS—
T G Meat Center LLC
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
LUBBOCK, TEXAS—
Professional Flooring Supply
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
HOOKS, TEXAS—
EnviroSafe Demil LLC
An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.
LOLITA, TEXAS—
Inteplast Group
An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.
HALLETTSVILLE, TEXAS—
Regency IHS of Fairwinds Halletsville, LLC
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.