105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Harcon, Inc.

Compressed or pinched by shifting objects or equipment · Fractures

Federal OSHA recorded a severe workplace injury at Harcon, Inc., 850 12th Ave, TUSCALOOSA, ALABAMA 35487 on — Fractures, affecting the jaw, chin.

While performing concrete form work from a scissor lift, an employee was caught between the ceiling and the lift, suffering a fractured jaw.

Hospitalized Jaw, chin Aerial lifts, scissor lifts-except truck-mounted

Harcon, Inc.

An employee fell 4 feet from a concrete form while using a concrete vibrator. His leg was broken between the ankle and the knee, and he was hospitalized.

Harcon, Inc.

An employee was gathering stacked building materials at the perimeter of the job site. When the employee picked up a piece of lumber, a raccoon jumped out from underneath the pile and bit the employee's right hand. The bite pierced the employee's glove. The employee was hospitalized due to rabies.

Harcon Inc.

An employee was standing beside a concrete column form, guiding it as a crane picked it up. The rigging came loose and the form fell to the ground, striking the employee on the way down. The employee suffered a left clavicle fracture, a left acetabulum fracture, transverse vertebrae fractures, compression vertebrae fractures, and multiple contusions and abrasions.

Harcon, Inc.

An employee was dismantling sections of scaffolding. A section of the scaffolding took his personal fall protection with it as it fell, causing the employee to fall about 15 feet to the ground. He suffered a fractured left shin and a laceration to his forehead.

Harcon, Inc.

An employee was working near the edge of a concrete slab preparing a skip pan to be removed from the building. The employee fell 10 feet when a skip pan that was on a cart rolled off the side of the first level of the building. The employee suffered a broken nose, three dislocated fingers on the right hand, and a right front hematoma.

View Harcon, Inc.'s full OSHA safety record →

TForce Freight

An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.

Liveo Research, Inc.

An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.

Best Pump and Flow

An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.

FORD MOTOR COMPANY

During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.

Lasseter Tractor Company. Inc.

An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.

WADDELL CONCRETE INC.

An employee was readjusting a safety hook to remove hardware from gang forms when his feet slipped. He fell to the ground, resulting in a broken left arm and wrist.

BRUNDAGE-BONE CONCRETE PUMPING, INC.

An employee was changing a boom pipe delivery system on a concrete pump truck. He tripped and fell from an elevated level to the ground, resulting in multiple leg fractures.

Kansas Paving / Kansas Ready Mix

An employee was reading numbers off a belt that feeds a plant. He reached his hand up and the belt caught his finger, resulting in a finger amputation.

Paul Conard Construction Co., Inc

An employee was guiding the pouring end of a concrete pump truck's boom while standing on top of 4-foot wall forms. The boom contacted power lines and the employee was shocked. The employee sustained third-degree burns on the entry and exit path of the electricity, and also sustained first- and second-degree burns to their torso and legs.

Mid Illinois Concrete & Excavation, Inc.

An employee was holding a form board on a section of pavement. A skid steer backed into the employee's ankle, breaking it. The employee was hospitalized.

Sysco Gulf Coast, LLC

An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.

Norflex, Inc.

An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.

Ampler Pizza II LLC

An employee was shot in the leg with a pistol during an altercation with two people who had entered the store without permission.

Birdsong Corporation

An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.

Pilgrims

An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.