Struck by object falling from vehicle or machinery-other than vehicle part · Soreness, pain, hurt-nonspecified injury
At a glance
Federal OSHA recorded a severe workplace injury
at Henry Schein, Inc. , 41 Weaver Road, DENVER, PENNSYLVANIA 17517
on — Soreness, pain, hurt-nonspecified injury, affecting the neck and back.
Final narrative
An employee was loading a conveyor belt from the front side of a skid. While he was bending down to reach for another product, a box fell on top of him, striking the back of his neck and upper back between the shoulder blades.
An employee was operating a standup forklift in the warehouse. The forklift struck racking, causing the employee to lose their balance. Their left foot became caught between the forklift and the racking and was fractured.
An employee was packing boxes and tried to catch a falling box. Afterwards, the employee felt shortness of breath. The employee was hospitalized for a lung injury.
An employee was transporting an 800-pound die on a cart from the tool room. The employee was pulling the cart when it struck a metal plate on the floor. This caused the cart to tip forward and the die to slide off the cart. The die struck the employee's left foot and their second toe was amputated.
An employee was using a forklift to load pallets of product on a trailer. He exited the forklift to adjust a pallet by hand. The pallet fell on him, resulting in an injury to the left leg.
An employee was lifting a 500-pound steel counterweight off a pallet using a magnetic hold jib crane. The counterweight detached from the crane and the employee sustained a left foot/toe fracture that required surgery.
An employee was using a pipe wrench to turn a 42-foot-long steel pipe on jack stands to weld the bottom portion. The pipe fell off the stands, striking the injured employee on his left shin. The employee sustained a left leg fracture at the shin area as well as a tibia fracture that required surgery.
More severe injuries in this industry (NAICS 423450)
An employee was operating a standup forklift in the warehouse. The forklift struck racking, causing the employee to lose their balance. Their left foot became caught between the forklift and the racking and was fractured.
An employee was servicing a circuit board on a portable X-ray unit when a battery cable touched part of the board, causing electrical burns to two fingers on his right hand.
A plumber was unclogging a sink in an employee's work area when the employee suffered an allergic reaction and an asthma attack from the liquid drain-cleaning chemicals.
The injured employee was putting away materials on the warehouse floor as a co-worker was pushing a pallet onto a nearby shelf. The pallet knocked another pallet forward, causing it to fall onto the injured employee's shoulders. The employee suffered fractures in their right and left knees and ankles.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.