Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Express Employment Professionals, 584 Commercee Road, CONWAY, ARKANSAS 72032
on — Amputations, affecting the finger(s), fingernail(s), unspecified.
Final narrative
An employee was helping a second employee feed corrugated fiberboard sheets into a slotter machine at approximately 16:15. They determined that a piece of tape was creating issues with the sheets as they fed them into the machine. The first employee was attempting to remove a piece of the tape when the machine cut his left little finger, resulting in an amputation.
A forklift backed into, and partially onto, a temporary employee's legs. It struck and injured her right calf and her left leg near the ankle sustained a severe gash. She was hospitalized with fractures and a partial degloving of the right leg.
A temporary employee was setting up a deck panel form. The temporary employee was working with two other employees to make the rebar cage fit in order to close the mold for production. A chain was used to pull or keep the cage in place. A short metal form wall fell and pinned the temporary employee's leg/ankle against the form base. He sustained a broken right fibula.
An employee was inspecting pieces as they came out of a machine. He went to pull apart the pieces. The punch came down and injured his fingers, resulting in amputations to his pinky finger as well as his middle and ring fingertips.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 561311)
A temporary employee fell from an A-frame ladder to the floor about 5 to 6 feet below. He suffered fractures to his left hip and was hospitalized, requiring surgery.
A temporary employee was operating an electric pallet jack at a loading dock. While maneuvering the pallet jack into a trailer, the equipment loaded onto the pallet jack began shifting to the left. The employee's left foot was caught between a yellow guardrail and the side platform of the pallet jack, and his left ankle was crushed and fractured.
A temporary employee was cleaning a room and compressing the contents of a garbage bin using her right foot. As she pulled her leg out of the bin, she lost balance and fell to the ground, landing on her left hip. The employee sustained a fracture to her left hip and was hospitalized.
A temporary employee was filling a sweeper with gas at a construction site. He was shocked by the jumper cables, which caused him to move his right hand into the sweeper's rotating fan blades. His middle fingertip was amputated.
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.