SA Recycling, LLC

A material handler operator was moving recycling material. When the operator let go of the material, the grapple swung back in the other direction. A piece of pipe flew from the grapple, striking an employee on the back of her hard hat. The employee fell to the ground and lost consciousness. The employee sustained a right parietal scalp injury, frontal brain hemorrhage, and T1 and T3 spinous process fractures. The employee was hospitalized.

An employee tripped on a single step and fell. The employee suffered a broken ankle that required surgery.

An employee was climbing down between a truck and trailer to remove the tarp from the load when the material got caught on the tarp. As he was climbing down to remove the tarp from the material, he tripped on a pipe or bungee cord and fell from the fender to the ground. The employee sustained fractured ribs and a pneumothorax on the right side of his body.

A temporary employee was working in the copper mill watching the grinding machine to ensure it did not jam up with excess material. The employee was manually removing the excess material by reaching over the bar in front of the silo while the guard was removed when their glove and hand became caught in the grinding machine's rotor blades. The employee sustained a partial amputation of their right index finger.

An employee was operating an excavator and lifting a rail when it slipped through the grappler attachment and slid toward the excavator cab. The rail penetrated the glass and impaled the employee in the abdomen. He sustained lacerations to the abdomen and injuries to internal organs.

An employee was moving a piece of an I-beam for welding when it rolled off the cribbing. The employee went to catch it when it fell and crushed the employee's finger, resulting in a partial amputation.

An employee was helping to disassemble large reels used to store steel wire when a 264-pound flange from the reel fell over onto the employee's left leg. The employee sustained multiple fractures to their leg and ligament injuries to the lower leg.

The injured employee was putting away materials on the warehouse floor as a co-worker was pushing a pallet onto a nearby shelf. The pallet knocked another pallet forward, causing it to fall onto the injured employee's shoulders. The employee suffered fractures in their right and left knees and ankles.

Employees were moving a single man lift into a building and reclining the lift to position it to fit through the door. The lift shifted and fell, causing the employee to sustain fractures to the left tibia and fibula. The employee was hospitalized and had surgery.

An employee was moving a light tower so it could be hitched to a truck. He grabbed the tongue of the trailer hitch on the light tower to slide it to the left. The tongue jack fell off, causing the light tower tongue to drop on the employee's right hand. The employee's middle fingertip was amputated.

An employee was going into a trailer to mark product for shipment and the trailer pulled away from the dock. The employee fell out of the trailer, contacted the dock plate, and then fell to the ground. The employee was hospitalized with a punctured lung, fractured ribs, and contusions.

An employee was checking on a machine outside of the building and removed a cover to clean out a blocked area. His hand was caught by a rotary valve in a dust collection machine. The employee's fingertip was amputated.

A shear operator's hand and fingers were caught in a machine's point of operation. The operator's right index finger was crushed and was partially medically amputated.

An employee was operating a forklift. He parked on a ramp and got off the forklift to retrieve material, at which point the forklift rolled backward and ran over his leg. The leg was broken and he was hospitalized, requiring surgery.

An employee was using a shear to cut metal when the blade cut his left ring finger and amputated his left little finger.

An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.

A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.

During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.

An employee slipped on condensation on a walkway in a parking garage. She fell and suffered a closed fracture to the neck of the left femur.

An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.