Struck against object or equipment, unspecified · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Delhaize America, 1245 US 202, WINTHROP, MAINE 04364
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was changing the blade on his safety cutter when the blade lacerated his right index fingertip, resulting in the amputation of a small portion of the skin on his fingertip.
An employee was attempting to remove two or three pallets from a stack of pallets when he slipped backward and fell onto the floor, fracturing his left hip. He was hospitalized.
An employee was tying a feed bag when his hand slipped and struck the side of the feed hopper resulting in a laceration to the left wrist. The employee was hospitalized.
At approximately 9:45 AM, a maintenance technician was assisting in removing a feed roller from a coating tank. The bolts were removed and a supporting chain was in place. The technician was using a prybar to unseat the roller shaft when the prybar slipped, causing him to lunge forward and strike the right side of his face against a valve stem. The technician sustained a fracture and laceration to the cheek, and required surgery for an injury related to his right eye. He was hospitalized.
An employee was cleaning and performing maintenance on a vertical panel saw when the employee impacted the saw blade. They sustained a finger fracture and laceration.
More severe injuries in this industry (NAICS 445110)
Employee 1 was investigating a gas odor. While employee 1 was checking the equipment, a gas explosion occurred, resulting in a fire that burned the employee's face. Employee 2 entered the area and a second explosion occurred, causing burns to their face and arms. Employee 2 was hospitalized.
An employee tripped while walking from one store register station to another. Her forehead struck a register, and she suffered fractures to two vertebrae in her neck. She was hospitalized.
An employee was stocking and ordering the meat case on the sales floor when he slipped and fell due to water on the floor. The employee was hospitalized with a fractured ankle and required surgery.
A crew was installing drilled micropiles alongside an outdoor covered deck foundation. The injured employee was working the front of the drill when a loose section of casing dropped onto the tip of a rig wrench and pulled the wrench down to an embedded casing. The employee's left little finger was caught between the rig wrench and the embedded casing and was amputated above the top knuckle.
Two employees were working to change a tire on a mobile slasher saw. The slasher weighs around 2,000 pounds and is towed. Employee 2 was lifting the saw while the injured employee was placing a block of wood under the frame for support. The slasher then lowered onto the block and the injured employee's left thumb was crushed between the slasher frame and the wood block, leading to an amputation at the first knuckle.
An employee was using a crane to move a 44-foot, 3,343-pound I-beam. As the beam was moving west, it straightened out (north to south), beginning to swing south toward the northwest corner of a building. The crane then sent the beam southward, directly toward the corner of the building. The beam caught the tips of the employee's left index, middle, and ring fingers against the building. The last joints of the middle and ring fingers were amputated, and the last joint of the index finger was partially crushed.
An employee was standing on a step stool, removing the nuts and bolts from the frame of a solar panel that was being replaced. The employee's cheek made contact with a connector with damaged insulation. The employee was shocked, briefly lost consciousness, and fell to the ground, suffering an injury to the left shoulder.