EUFAULA, ALABAMA—
M.C. Dixon Lumber Company, Inc.
Injured by slipping or swinging object held by injured worker · Fractures
At a glance
Federal OSHA recorded a severe workplace injury at M.C. Dixon Lumber Company, Inc., 605 West Washington Street, EUFAULA, ALABAMA 36027 on — Fractures, affecting the jaw, chin.
Final narrative
An employee was clearing a jam on a waste chipper's conveyor using a pry bar. The bar kicked back, striking his face and breaking his jaw. He was hospitalized.
More severe injuries at M.C. Dixon Lumber Company, Inc.
EUFAULA, ALABAMA—
M.C. Dixon Lumber Company, Inc.
An employee was observing the grade chain line moving lumber. He activated the emergency stop button with his right hand and went to turn the lumber with his left hand. A piece of 6 x 6 lumber crushed his left little finger resulting in partial amputation of the fingertip.
EUFAULA, ALABAMA—
M.C. Dixon Lumber Company, Inc.
An employee was placing waste wood onto a 30-inch-wide, 20-foot-long conveyor. The employee was trying to remove a piece of wood that had hung up in the conveyor's bottom belt when the conveyor caught his hand and amputated his right arm at the shoulder.
EUFAULA, ALABAMA—
M.C. Dixon Lumber Company, Inc.
Two employees were putting back a planer chain using a come-along. The come-along slipped and the chain fell, landing on an employee's right middle finger. The fingertip was amputated (without bone loss).
View M.C. Dixon Lumber Company, Inc.'s full OSHA safety record →
Similar incidents · Same event type
MATHIS, TEXAS—
Mako Contracting, LLC
An employee was using a saw to cut a piece of concrete when the piece gave way and pushed the saw into the employee's leg. The employee's leg was lacerated, requiring stitches and hospitalization.
TOPTON, PENNSYLVANIA—
East Penn Manufacturing
An employee was using a utility knife to cut honeycomb paper when the knife amputated their left index fingertip.
NEW LENOX, ILLINOIS—
Ash Brothers Fireplace and Chimney Co
An employee was cleaning a resident's chimney. While using a drill, the employee's glove became caught in the drill and their finger was fractured.
RAPID CITY, SOUTH DAKOTA—
RPM & Associates Inc
An employee was grinding some hardfacing on a bulldozer blade when the 9-inch grinder kicked back and lacerated his left leg above the knee. The employee was hospitalized and required surgery.
BLYTHEVILLE, ARKANSAS—
Tenaris Hickman
An employee was operating a rotating tool to place thread protectors on the end of pipe. Her left hand was on the rotating part of the tool when the tool engaged, resulting in a left forearm fracture and a thumb laceration.
More severe injuries in this industry (NAICS 321113)
STATESBORO, GEORGIA—
Claude Howard Lumber Company
An employee was repairing a photo eye on the infeed roll case when they dropped a tool. The employee went to grab the tool and his fingers contacted the chain and sprocket of the infeed roll case. His fingers were pulled into the pinch point and the fingertips were crushed, resulting in amputation of one fingertip.
FREEPORT, TEXAS—
Shintech Inc
An employee was troubleshooting dispersing equipment. A belt and pulley system was energized, and the moving belt caught the employee's right ring finger. He suffered a partial amputation at the first knuckle, below the nail.
OPELIKA, ALABAMA—
West Fraser, Inc.
An employee was cleaning the photo eye sensors of a piece of equipment between the saw that cuts lumber into lengths and boards. The employee stepped on a metal grate that gave way and fell 8-10 feet. The employee was able to remove himself from the conveyor. His tibia was fractured just below the knee.
REDWOOD, MISSISSIPPI—
SWS Sawmill, LLC
An employee was working to get a log back onto a carriage. The employee came into contact with the running saw, which amputated their arm.
ATHOL, IDAHO—
IDAHO FOREST GROUP, LLC
While refilling a lubricant tank, an employee observed that a pump was not operating correctly. While troubleshooting the issue, the employee reached toward the back of the pump to check for proper airflow. Their left index finger contacted moving components in the pump's piston mechanism, resulting in partial amputation of the fingertip.
More severe injuries in ALABAMA
GENEVA, ALABAMA—
Sysco Gulf Coast, LLC
An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.
BESSEMER, ALABAMA—
Norflex, Inc.
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
ANNISTON, ALABAMA—
Ampler Pizza II LLC
An employee was shot in the leg with a pistol during an altercation with two people who had entered the store without permission.
ATMORE, ALABAMA—
Birdsong Corporation
An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.
ROGERSVILLE, ALABAMA—
Pilgrims
An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.