Sunshine Mills, Inc.

An employee was using a lathe to smooth out a shaft. The machine caught his left ring finger and amputated it.

A loose belt on a gluer caught an employee's right hand, causing the amputation of the little fingertip and lacerations on the ring and middle fingers.

An employee was performing a die change during a product change-over. The employee removed the chute and used a metal tool to scrap debris from the opening. The tool became caught in the auger, which pulled the tool and the employee's hand into the auger blade. The employee sustained complete amputations to the four fingers on the right hand. The auger was not locked/tagged out and was running at the time of the incident.

An employee was operating a band saw when his right little fingertip was amputated.

An employee was operating a strip saw. As the employee shut off the saw, their right index and middle fingertips were amputated by the blade before it came to a complete stop.

An employee was using a table saw to cut a piece of wood for wall framing. The wood jumped, causing the employee's hand to move toward the saw, amputating their left index finger and causing a laceration on their hand.

An employee was operating a trim saw. While trying to free a jammed board she had just cut, she came into contact with the running saw blade, which amputated her right thumb.

An employee was using a shaper to cut wood when their right hand contacted the blade, resulting in a partial amputation to the right ring finger.

An employee was working to remove a spatula that got stuck in an auger at the bottom of a hopper. The employee went to remove the face plate to help release the spatula. His fingers were in the holes to pull off the face plate when the machine actuated. His right middle finger got trapped between the face plate and the inner plate, resulting in amputation.

An employee was walking in a parking lot during break when they were struck by a vehicle, resulting in fractures to their left scapula and lower right leg.

An employee bent down to turn on an air valve, lost their footing, and struck their hand on a pressure relief valve while trying to catch themselves. The employee suffered an amputation to their right index fingertip.

An employee was working on a production line, packaging chews for animals. She retrieved a fallen cap for another production line from the floor and went to put in back in the machine it had fallen from (a capper). The machine caught the tip of her left little finger, causing a fingertip amputation.

An employee was taking apart the piping to a meat pump for clean-up. He saw food debris inside the pump housing and went to remove it. The meat pump rotor caught and severed his right index and middle fingertips, resulting in partial fingertip amputations.

An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.

An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.

An employee was shot in the leg with a pistol during an altercation with two people who had entered the store without permission.

An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.

An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.